Tick turbo cam 317 heads w springs gen 4 rods and Pistons
07-05-2016, 10:05 PM
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Dec 2008
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Tick turbo cam 317 heads w springs gen 4 rods and Pistons Category: Engine - Intake/Fuel
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): NM
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
First is a lightly used Tick LS2 Stage 1 turbo cam. Specs are 227/231 | .625"/.605" | LSA114+4. This cam in my car made 680/630 on 10lbs of boost. Real good street manners. Good lope. SOLD
Next is a set of 317 heads with pac 1518 springs in them. These heads have the same amount of miles as the cam, and were used on the same set up. Heads a a valve job right before install and were milled. Looking to get $350 for them.
Lastly are a set of gen 4 Pistons, rods and arp 2000 rod bolts. These came from the block that I used as my doner for my built motor. It had a spun rod bearing when purchased so this set is sold as it. 1 rod looks like it heated up pretty good and may have warped the cap. Arp rod bolts and Pistons all look good. Id like to get $200 for the set.
Also have a set of gen 4, 4.8l h beam connecting rods. These came with the Pistons I purchased for my built motor. They're said to be 6.275" in length. They come with wrist pins and look to have very low miles on them. I'd like to get $100 for them.
If you have any questions, concerns, would like to see more pictures, anything, feel free to send me a pm and I will answer ASAP. Cam and heads are still on the vehicle till Friday when I take the motor apart. Thanks
Last edited by z2h8t; 07-11-2016 at 03:58 PM. Reason: Sold items
