SRP Pistons and Eagle rods for L76/LS2 engine.
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Aug 2015
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
SRP Pistons and Eagle rods for L76/LS2 engine.
Category: Accessories
Price: $300
Location (State): CT
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
Up for sale are my used Forged SRP Pistons (P/N 279590) and my Forged Eagle rods with ARP bolts. They came out of a professional build with about 40k on them. I had an oiling failure which caused low oil pressure in my L76.
6 of the 8 pistons are in good shape, but most of the coatings are worn off. 1 has some visual grooves in the sides, but smooth to the touch. 1 piston is grooved badly, and most likely can't or shouldn't be used. To be honest, I'd rather keep this piston and turn it into a piston clock. Some also have chips in them from when a rocker failed and sent needles into the engine at one point before I owned the car(unbeknownst to me, thanks previous owner) that somehow didn't cause the engine to fail then. One piston has a decent chip in the bottom portion of it, I assume from a needle hitting it. I'm asking $120 OBO for the 7 pistons, not including the beat one. I'm not sure about the piston rings. They look okay, but I'd probably replace them on principal. This would be good for someone with a budget or cheap build, I wouldn't use these in a worked or max effort build. Full disclosure.
The Eagle rods seem to be in great shape, aside from the bearings, which were shot. The pistons installed in the rods had no side to side play whatsoever. At one point before I bought the car and engine, there was a rocker failure and sent needles throughout the engine. So there are a couple nicks in some of the rods. Other than that these are in great shape, and I would use these in any build suited for their HP rating. $260 FIRM. --SOLD-
I understand that selling internal parts from an engine with an oil failure can be a touchy situation, please ask me any questions that you have about the parts. I'm selling the pistons cheap because they took the most abuse, the rods seem untouched by the failure. My prices reflect this.
Last edited by K10Turbo; 10-04-2016 at 08:58 AM.