1BadGTM

Category: Engine - Complete Motors
Price: $4000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): TX
Item Condition: Brand New
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, Small Block
LS Engine?: Fits LS Engine

Ok, this is a one time deal. What I have to offer is an Iron Block LS engine built for boost. This includes the following: a 5.3L iron block that's been baked and blasted, block has been debured / stress relieved linehoned mains with ARP main stud fasteners (included) , cylinders bored and then finish honed with a torque plate with ARP Head Studs (Not included), Block surfaced to ensure a smooth square deck surface, cleaning, balancing and Blueprinting of short block and components.

The engine will be fitted with the following parts: New K1 Technologies 3.622" Stroke 4340 Forged Crankshaft, New K1 6.125" Technologies Forged H Beam Connecting Rods with ARP2000 bolts, New Wiseco Forged Shelf Piston of your choice that include New GFX Steel Top and Napier Second Ring Packs, New Tool Steel Wrist Pins, New engine block plugs. New Clevite Main and Rod Bearings, New Durabond CHP Cam Bearings.

Crating and shipping extra. cost about 50 bucks for me to build a crate.

It will handle 1200 HP all day long. Look closely at the parts list there's some good stuff in there and you would be pretty hard pressed to find something equal for the price. This engine isn't ready yet and won't be until you decide what pistons you want. PM me if you need help, I'm more than happy to help out.

Camshafts, Timing sets, Ect. Ect. Also available.

Price is $4,000

1BadGTM

To the top.

1BadGTM

Bring it up.

1BadGTM

To the top

1BadGTM

To the to guys this is a complete short block.

You would be very hard pressed to find the same quality of parts and work for less.

Located in Houston Tx.

1BadGTM

TO the top

breecher_7

iTrader: (1)

Buy with confidence, he is a great person to work with..

His work, Doing Work:
https://ls1tech.com/forums/forced-in...recisions.html