323z

Category: Accessories
Price: $700
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): MN
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6, Small Block
LS Engine?: Fits LS Engine

SOLD SOLD SOLD

Machine shop work preformed as followed.
Heads were disassembled and bead blasted. Seat and valves were cut. Receipt says heads were milled. but when I asked I was told just .003 was taken off. Some say that's just resurfacing. So cc should still be stock as you can still see the stock waves in the head.

Brain Tooley Racing 660+ lift Platinum Dual spring kit.

Purchase date on springs 8/23/2016 date on heads are 8/25/2016.
Nothing wrong with these heads, were back ups. Thinking on stepping up to some 200cc+ TF heads. Heads are sold, they sold locally.

323z

To The Top

gtotoocool1

iTrader: (6)

Who did the machine work?performance VJ?

323z

Cylinder Head & Motor Supply Co. Located at 2206 4th Ave So. Mpls,MN 55404. It's a no frills shop. They don't 5 angle or butter your ***. Just good old fashion machine work.

And sorry milled/resurfaced at .030 not.003. my math not great, comp much better.

gtotoocool1

iTrader: (6)

damn,I was hoping they only took off .003,as I'm doing a turbo build..030 would put the CR a little higher than I want.
bump for ya,

323z

Sorry man I am a dumb arss and it took a beer or 4 to figure it out. CHS(and most MS) resurfaced heads from .003 to .005. any more then that then it's milling. And these heads were good at .003.
.30 thousands would be a lot. Can still slightly see the factory mill lines in the heads(gen4) at an angle. I have the same set up(Heads,springs) on my TT 5.3 with a LJMS stage 2# turbo cam. Wheeler Racing put my block together. Came back with a calculated CR of 9.68. These heads will be in the same CR ballpark.

stock rocker,bolts,pedestals not pictured but included.

323z

to the top

323z

I will add the Comp Cams Trunions kit installed(pics above) with the 799 heads 850$.

850$ gets you the heads, the rockers w/ Triunion kit installed, the rocker stands. comp cams rocker bolts.
I have valve covers and square coils for an extra 50$. get that deal with the purchase of the head package only.

323z

to the top

323z

1 of the most expensive sets of 799 heads(non-CNC'ed) listed on here I know. But everybody else is asking 400$ for used sets. I have 300$ in machine shop work and 300$ for the BTR springs.
I paid 250$ for the heads and I haven't seen a set of used sell for under that. I have 850$ into heads&springs asking 700 obo. Pm with questions.

323z

SOLD.SOLD