Nathaninwa

Category: Accessories
Price: $1
Part Fits: 2010+ Camaro
Location (State): WA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I usually hold on to stuff not knowing what I may build in the future, but I'm wanting to finish a powerglide swap and need some parts, so letting go o some pistons and a cam

These parts literally have 34 miles on them. I put the car together summer of 2015 and ran the car for September and part of October 2015 and decided to turbo the setup over the winter of 2015/2016

There a custom set of drop in pistons for the LS3. 4.065 bore with STOCK sized connecting rod. Depending on gasket and milling of head you can be around 12-1 compression. I milled mine to 64cc iirc and with a .040 cometic I was 12.5-1 compression with .035 squish. Comes with pistons, pins, and clips

Looking for 450 shipped plus pp fees on those

Also is a custom cam for those pistons that Martin spec'd out for those pistons and LS3 heads. Specs are in the picture, but it was mildly roudy. I'll link a video to my car idling on it

Looking for 300.00 shipped on the camshaft plus pp fees

This combo ran 10.6@133 in my 2650lb 240z with a horribly tight converter through a 4l80e and 9 inch

34 miles on the parts and some idling time, three 1/8 mile passes and four 1/4 mile passes in total

Car was on the dyno, but feel power is low from the 325 drag radials on it. Came out with 460whp, but trap speed puts whp way closer to 500

Ask me any questions Open to offers Can text me. 3605891072

Quickfrc

iTrader: (10)

Are they for stock rods, or stock sized rods?

Nathaninwa

They are for stock sized rods, the .945 pin and 6.098 length, bushed setup, not press pin

Rods are not included in this

I hadn't planned it this way, but during the build I ended up getting Eagle rods, .945 pin 6.100 length. That's what was run for the 34 miles

Nathaninwa

To the top

LXinMS

iTrader: (58)

Tempting af, might do away with my LSA swap...

Nathaninwa

The cam was ground with these pistons as a spec. I can link some 1/8 mile video of the combo of needed

95z286.0ls

Are the skirts coated

Nathaninwa

Sorry I missed this. Yes they are coated, with light scuffing from the time I put on them. You can see the black coating in one of the pics



Price is offer too

Nathaninwa

Weekend bump

With these pistons and cam, there is almost .200 valve clearance. It's like .180 on exhaust and .210 on the intake

Nathaninwa

Monday bump

Nathaninwa

Offer on the combo?

I ran this setup with bushed stock rockers

Nathaninwa

Weekend bump

Nathaninwa

To the top

Nathaninwa

Somebody needs high compression stuff! My heads were miller to 62cc's, with stock heads it's on the mid 11's on compression

SuperHatch

PM sent... cash in hand, make a counteroffer if you will.

SuperHatch

Payment sent for Pistons.

Nathaninwa

Pistons are sold

Camshaft is still available