1000hp+ twin turbo Part Out!
#1
1000hp+ twin turbo Part Out!
Category: Accessories
Price: $16000
Part Fits: 93-02 Chevrolet Camaro
Location (State): MI
Item Condition: Brand New
LS Engine?: Fits LS Engine
Turbo:
twin Turbonetics 7668 ball bearing .81AR T6 $1000 each
Huron Speed hotside kit, truck manifolds and downpipes (T6 kit, down and forward, alternator relocation is necessary, unknown about A/C but likely needs deleted, turbo K-member unknown but likely needed) $800
Drivetrain/suspension:
3.5" PST steel driveshaft, chromoly yoke $300
Strange S60 rear, 35 spline axles, 3.54 gear, 5/8" studs, shortened 3" each side, BMR LCA relocation brackets $2000
Line lock $30
Fuel:
two Walbro 255's $50 each
one AEM 320 Lph E85 pump $75
ID2000 injectors EV6 $1750
0411 ECM stock tune $100
T56 crossmember $125
poly trans mount $20
I do have all the accessories and little stuff to go with everything, i just have not priced them out. I wanted to get the bigger/more desirable items out first.
Last edited by Nebulus; 06-04-2018 at 05:38 PM.
Trending Topics
#13
Staging Lane
iTrader: (3)
Join Date: Dec 2014
Location: West Texas
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
So,
The Compstar rods include bolts...correct?
I just noticed you have the rods and a set of rod bolts listed separately and want to be clear.
Also,
Has the rotating assembly been balanced yet? I may be interested in the whole assembly...
The Compstar rods include bolts...correct?
I just noticed you have the rods and a set of rod bolts listed separately and want to be clear.
Also,
Has the rotating assembly been balanced yet? I may be interested in the whole assembly...
Last edited by GNGUY; 10-01-2017 at 09:57 PM.
#20
Obviously should have done this a long time ago, but here are some pictures. Rear end has surface rust, but it comes off very quickly with a wire brush and simple green. This will be cleaned up upon sale. Cylinders 6+8 have a small amount of hazing in them, this will be cleaned up as well. I apologize for the color of some of the pictures, my phone has a known issue with the photoreceptor cell, so pictures come out purple/blue in low light.