LS1/6/ 3 Internals and externals!
 

https://cimg1.ibsrv.net/gimg/ls1tech...871a8b1cf4.jpg
So I just bought a crate LS3 and No longer will be building a LS1.

Comp Cam Installed in short block but never ran text for cam card. $300

Eagle H Beam Rods Summit sells for $550ish New assembled in short block never ran stock dimensions good for 750hp $400

SLP performance Oil pump new assembled onto short block never oiled/turned #55001 sells for $180 . $150

02 Vette fly by wire stock Throttle body off my car. $125

Speed Engineering Pushrods Chromoly Steel 7.4" .080 wall 100 miles $100 new $70

Ls1 crank 24x .010 under on mains .020 under on rods. Polished out. $225

LS Aluminum 5.7 pre 2000 no groove rear oil galley on block. 3.898 bore but needs to go .005 over, deck surface needs to be skimmed. $200.

LS Aluminum 5.7 out of my 2002 Vette so it's an LS6. 3.898 bore but needs to go .005 over and mains need line bore. $250

2002 Vette exhaust Manifolds Perfect $150

2015 Camaro exhaust manifolds 127 miles not a typo! $190

text is great, for pics 845 260 3050 parts in Lower NY Buyer pays shipping IF USING PAYPAL SEND IT THROUGH THE FRIEND AND FAMILY SO I DON'T GET CHARGED FEES! THANK YOU

Ttt thanks

New Items listed

Daily bump

Daily bump.

Parts
 

To the top. Taking offers. Ls3 is in LS1 stuff needs to GO!

Do you have a part number for the rods?

CRS-6100-MS1 etched in Rods

M3D last three if you're going to search online

yes LS6 intake is complete and original GM 2002 from my corvette includes injectors and fuel rail. Fly by wire TB extra

Can you post a pic of the intake ?

bump it up

What are the specs on the cam?

camshaft information is now posted via picture