Gen IV 370 6.0L iron performance shortblock - NEW (SOLD)
01-14-2018, 11:22 AM
#1
Gen IV 370 6.0L iron performance shortblock - NEW (SOLD) Category: Accessories
Price: $2750
Location (State): MO
Item Condition: Brand New
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
-GEN IV truck block
-bored .020", torque plate honed, square decked, race prepped, oven baked and media blasted, painted gloss black - CLEAN
-all bolt holes have been thread chased and are perfect
-Stock 58T reluctor crank, mains ground .010", rods are standard size, balanced within .5 gram
-LQ9 floating rods, bushed, small end sized to Wiseco pins, ARP 2000 rod bolts, big end sized after ARP bolt install
-Wiseco +9cc forged pistons with 1.2, 1.2, 3.0mm ring package, coated skirts, comp ratio 11.5:1 with 68cc heads/.053 gasket
- pistons rings file fit for power adder
-FM performance rod and main bearings - oil clearance set
-Durabond HD babbit cam bearings
-build sheet with all specs - professionally assembled short block ready for cylinder heads and covers to be installed.
-JP Performance single billet roller timing chain
-Melling 10295 oil pump
-LS7 lifters
-Texas Speed Performance 228/232 @ .050" .600"/.600" 112 lsa
**buyer needs to supply oil pan, windage
tray, front and rear covers
***this engine with a set of 243 heads will make 550HP on pump gas and be rock solid reliable!
I also have a set of completely fresh 243 heads. New competition 5 angle valve job. Stock reground valves. New valve seals. New surface mill with PCD tooling. PSI roller beehive valve springs. Ready to install for 650.00
2750.00
Serious only,
Buyer pays shipping and Paypal fees (if used)
Contact
314-four-five-two-66-three-nine
Call or text
Last edited by helicoil; 02-03-2018 at 11:32 PM.
