Garage cleanout- Quartermaster, bmr, lq4, etc.
01-22-2018, 03:05 PM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Dec 2012
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Garage cleanout- Quartermaster, bmr, lq4, etc. Category: Drivetrain
Price: $1
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
UNUSED Quartermaster 7.25 v-drive twin disc clutch kit with button flywheel
This is not new as in just purchased, but it is unused. I couldn't find a part number on it, but here is the corresponding listing at Quartermaster http://www.quartermasterusa.com/qm/b...tton-unithtml/
Looks like retail is $625
Will include bolt kit 309507
$425 plus shipping
Quartermaster Tri-lite Hydraulic release bearing
Purchased from a member on here. I think it was new, but can't be sure. Been sitting in the garage for a lil while.
http://www.quartermasterusa.com/qm/t...e-bearinghtml/
$150 plus shippingSOLD
BMR Torque arm relocation crossmember for T56
All I have is the actual crossmember, but the missing hardware can be purchased (already verified with BMR), but I am not sure for how much.
http://m.bmrsuspension.com/?page=pro...d=58&catid=168
$130 plus shippingSOLD
Derale 16749 adjustable fan controller
NEW and Unused https://www.summitracing.com/parts/der-16749
$40 plus shipping
Right Stuff Detailing Rear Disc Brake Conversion Kit
Opened but unused. Got it partway installed and realized wrong kit. This kit is for NON-staggered shocks, which is why I had to replace it. https://www.summitracing.com/parts/rsd-afxrd01/overview
$300 plus shipping
Pedal Assembly
Used, out of 2001 camaro- what you see is what you get.
$80 plus shipping
All the parts below came out of the lq4 I am building. Unknown mileage out of a 2003 Express van. I have not tested anything. Pictures available upon request. All parts are plus shipping.
Complete Intake including rails, injectors- $100
Truck/van accessories. I have everything that came off the engine which would include brackets, tensioners, p/s, a/c, H20, alt., fan and I think I have the bolts- $200
Truck oil pan- $50
Exhaust manifolds- $60
Stock camshaft- make offer
Sock pushrods- make offer
Stock lq4 dished pistons and press fit rods- make offer
317 heads- appear to be in good condition but dirty (with rockers)- $250
Oil pump and timing set- make offer
I am open to offers, and I do not know what some of these things are worth. I may have some additional items and will update as necessary.
Last edited by BerwynCamaro; 03-18-2018 at 05:01 PM.
01-23-2018, 10:43 AM
#3
Teching In
Join Date: Sep 2017
Location: St. Augustine, Fl
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hello all, long overdue garage clean out going on. I couldn't get pictures to work, but will try again later tonight.
UNUSED Quartermaster 7.25 v-drive triple disc clutch kit with button flywheel
This is not new as in just purchased, but it is unused. I couldn't find a part number on it, but here are the listings at Quartermaster http://www.quartermasterusa.com/qm/c...al-balancehtml
Will include bolt kit 309507
$450 plus shipping
Quartermaster Tri-lite Hydraulic release bearing
Purchased from a member on here. I think it was new, but can't be sure. Been sitting in the garage for a lil while.
http://www.quartermasterusa.com/qm/t...e-bearinghtml/
$150 plus shipping
BMR Torque arm relocation crossmember for T56
All I have is the actual crossmember, but the missing hardware can be purchased (already verified with BMR), but I am not sure for how much.
http://m.bmrsuspension.com/?page=pro...d=58&catid=168
$130 plus shipping
Derale 16749 adjustable fan controller
NEW and Unused https://www.summitracing.com/parts/der-16749
$40 plus shipping
Right Stuff Detailing Rear Disc Brake Conversion Kit
Opened but unused. Got it partway installed and realized wrong kit. This kit is for NON-staggered shocks, which is why I had to replace it. https://www.summitracing.com/parts/rsd-afxrd01/overview
$300 plus shipping
Pedal Assembly
Used, out of 2001 camaro- what you see is what you get.
$80 plus shipping
All the parts below came out of the lq4 I am building. Unknown mileage out of a 2003 Express van. I have not tested anything. Pictures available upon request. All parts are plus shipping.
Complete Intake including rails, injectors, and tb (if desired)- $100
Truck/van accessories. I have everything that came off the engine which would include brackets, tensioners, p/s, a/c, H20, alt., fan and I think I have the bolts- $200
Truck oil pan- $50
Exhaust manifolds- $60
Stock camshaft- make offer
Sock pushrods- make offer
Stock lq4 dished pistons and press fit rods- make off
317 heads- appear to be in good condition but dirty (with rockers)- $250
Oil pump and timing set- make offer
I am open to offers, and I do not know what some of these things are worth. I may have some additional items and will update as necessary.
UNUSED Quartermaster 7.25 v-drive triple disc clutch kit with button flywheel
This is not new as in just purchased, but it is unused. I couldn't find a part number on it, but here are the listings at Quartermaster http://www.quartermasterusa.com/qm/c...al-balancehtml
Will include bolt kit 309507
$450 plus shipping
Quartermaster Tri-lite Hydraulic release bearing
Purchased from a member on here. I think it was new, but can't be sure. Been sitting in the garage for a lil while.
http://www.quartermasterusa.com/qm/t...e-bearinghtml/
$150 plus shipping
BMR Torque arm relocation crossmember for T56
All I have is the actual crossmember, but the missing hardware can be purchased (already verified with BMR), but I am not sure for how much.
http://m.bmrsuspension.com/?page=pro...d=58&catid=168
$130 plus shipping
Derale 16749 adjustable fan controller
NEW and Unused https://www.summitracing.com/parts/der-16749
$40 plus shipping
Right Stuff Detailing Rear Disc Brake Conversion Kit
Opened but unused. Got it partway installed and realized wrong kit. This kit is for NON-staggered shocks, which is why I had to replace it. https://www.summitracing.com/parts/rsd-afxrd01/overview
$300 plus shipping
Pedal Assembly
Used, out of 2001 camaro- what you see is what you get.
$80 plus shipping
All the parts below came out of the lq4 I am building. Unknown mileage out of a 2003 Express van. I have not tested anything. Pictures available upon request. All parts are plus shipping.
Complete Intake including rails, injectors, and tb (if desired)- $100
Truck/van accessories. I have everything that came off the engine which would include brackets, tensioners, p/s, a/c, H20, alt., fan and I think I have the bolts- $200
Truck oil pan- $50
Exhaust manifolds- $60
Stock camshaft- make offer
Sock pushrods- make offer
Stock lq4 dished pistons and press fit rods- make off
317 heads- appear to be in good condition but dirty (with rockers)- $250
Oil pump and timing set- make offer
I am open to offers, and I do not know what some of these things are worth. I may have some additional items and will update as necessary.
T56 Crossmember still for sale?
Trending Topics
01-26-2018, 02:59 PM
#13
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
The torque arm relocation crossmember is for the stock or aftermarket trans mounted torque arm correct? If So, do you know if it will work with the UMI non-adjustable one? I just need to be totally sure
Last edited by HCI2000SS; 01-26-2018 at 03:06 PM.
01-27-2018, 02:46 PM
#14
Teching In
Thread Starter
iTrader: (4)
Join Date: Dec 2012
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
For the record, I have not used any of these parts. They came into my possession just as they are listed. If you have fitment specific questions I will not be able to provide more insight than a website.
