For sale ID 1300 injectors, they have about 10 1/4 mile passes on them. These are LS1 - LS6 with clips & pins and were used in an LSX block. I am going with an aftermarket ECU and can’t use them. I don’t sell on here a whole bunch, so there is a link of my feedback from my primary forum.
http://www.camaro5.com/forums/itrader.php?u=22903

$1400.00 OBO plus shipping

Thanks for looking......
Curt
DETAILS BELOW
Part# 1300.03.03.60.14.8 Categories: Injector Dynamics, C5 Engine, 98-02 F-body Engine, CTS-V 04-07 Engine, Fuel Delivery, GTO Engine

• Each Injector verified to flow 1300cc/min at 43.5psi.
• Superior atomization and narrow spray pattern for more power, near factory idle, and excellent fuel efficiency.
• High Impedance; no need for injector drivers or injector resistors.
• High pressure capability up to 100psi fuel pressure. (Requires atleast 10V)
• High duty cycle, with a recovery time of only 1ms: Capable of 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
• Excellent low pulsewidth response: Injectors perform with linearity within 2% to 2ms; predictable response at 1.5ms.
• Repeatable consistency: No two sets will require more than a 1% trim Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

Bump $1100.00! Need these gone.

You interested?

Tttop

PM sent