LS1, LS2, LS7 block needed
01-27-2009, 09:32 AM
#1
FormerVendor
Thread Starter
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
LS1, LS2, LS7 block needed ****************FOUND*****************************
OK guys, I need another motor/block. I have been all over the for sale section, and there is just SO MUCH **** over there that I figure I would try here, in hopes of someone finding ME!!
Here is the deal:
I bought a motor from a guy here on teh site. He decided to sell it to someone else AFTER I sent the money to him and my cousin shows up at his door to collect the motor. The member is in teh midst of making things right, and if he does what he says, than we will be cool. IN teh meantime, I am looking for:
LS1 motor...bare block, shortblock, or alongblock. Looking for a good deal, and hopefully something close.
Or:
LS2 motor...bare block, shortblock, or a longblock. Again, looking for a good deal.
Or:
LS7 I figure is a long shot at finding a good deal on, but, i figure I will post it anyway for teh sake of you never know
So, I am looking for teh same thing...bare block, shortblock, or a long block, BUT, a good deal.
I am so tired of:
"$200 for my used oil pan that you can buy a new one at the dealer for teh same price"
Or
"I have alt bracket for $50 even though they are $25 for both, new from teh dealer"
I am easy to deal with (look at my feedback) and I am just looking for a good deal on a motor. That's all. Thanks guys
*********************FOUND************************
OK guys, I need another motor/block. I have been all over the for sale section, and there is just SO MUCH **** over there that I figure I would try here, in hopes of someone finding ME!!
Here is the deal:
I bought a motor from a guy here on teh site. He decided to sell it to someone else AFTER I sent the money to him and my cousin shows up at his door to collect the motor. The member is in teh midst of making things right, and if he does what he says, than we will be cool. IN teh meantime, I am looking for:
LS1 motor...bare block, shortblock, or alongblock. Looking for a good deal, and hopefully something close.
Or:
LS2 motor...bare block, shortblock, or a longblock. Again, looking for a good deal.
Or:
LS7 I figure is a long shot at finding a good deal on, but, i figure I will post it anyway for teh sake of you never know
So, I am looking for teh same thing...bare block, shortblock, or a long block, BUT, a good deal.I am so tired of:
"$200 for my used oil pan that you can buy a new one at the dealer for teh same price"
Or
"I have alt bracket for $50 even though they are $25 for both, new from teh dealer"
I am easy to deal with (look at my feedback) and I am just looking for a good deal on a motor. That's all. Thanks guys
*********************FOUND************************
Last edited by Gen414; 01-30-2009 at 10:14 PM.
01-27-2009, 12:34 PM
#3
TECH Apprentice
iTrader: (59)
Join Date: Jul 2004
Location: NJ
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2000 LS1 block that was resleeved (dry sleeves) a while ago by ARE.
I was going to build it into a 427 but planed have changed. The block is still at my machine shop. I just had the block bored and honed out to a 4.125 bore (was 4.10), it has been checked and cleaned and YES THE BLOCK HAS BEEN DECKED to ensure straightness and sleeve heights are right.
It has coated 1-piece cam bearings installed and APR main studs.
$1300+shipping
I could have it build to a fully forged 427 for about $4500.
I was going to build it into a 427 but planed have changed. The block is still at my machine shop. I just had the block bored and honed out to a 4.125 bore (was 4.10), it has been checked and cleaned and YES THE BLOCK HAS BEEN DECKED to ensure straightness and sleeve heights are right.
It has coated 1-piece cam bearings installed and APR main studs.
$1300+shipping
I could have it build to a fully forged 427 for about $4500.
01-27-2009, 01:14 PM
#5
FormerVendor
Thread Starter
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2000 LS1 block that was resleeved (dry sleeves) a while ago by ARE.
I was going to build it into a 427 but planed have changed. The block is still at my machine shop. I just had the block bored and honed out to a 4.125 bore (was 4.10), it has been checked and cleaned and YES THE BLOCK HAS BEEN DECKED to ensure straightness and sleeve heights are right.
It has coated 1-piece cam bearings installed and APR main studs.
$1300+shipping
I could have it build to a fully forged 427 for about $4500.
I was going to build it into a 427 but planed have changed. The block is still at my machine shop. I just had the block bored and honed out to a 4.125 bore (was 4.10), it has been checked and cleaned and YES THE BLOCK HAS BEEN DECKED to ensure straightness and sleeve heights are right.
It has coated 1-piece cam bearings installed and APR main studs.
$1300+shipping
I could have it build to a fully forged 427 for about $4500.
Hmmmm, interesting. PM coming.
Trending Topics
01-29-2009, 10:50 AM
#8
I have a new LS2 block for $1000, saves you a $1000 and I might be able to meet you partway depending.
I have L92 heads complete for $625/pr.
I have a 6.0 iron block for $500.
I have a couple of complete engines. Call me and I'll give you details. Not going to be on the computer the rest of today.
940-453-2582
I have L92 heads complete for $625/pr.
I have a 6.0 iron block for $500.
I have a couple of complete engines. Call me and I'll give you details. Not going to be on the computer the rest of today.
940-453-2582
