Wanted: LT4 Hotcam/ mild LT1 cam
#1
Wanted: LT4 Hotcam/ mild LT1 cam
Hey all, i'm in the middle of a LT1 swap into my thirdgen camaro. I'm looking for a LT4 hotcam or something similar while i have the motor out.
Let me know what you guys have lying around.
~JAKE
see the swap here http://cascadecrew.org/phpBB2/viewto...er=asc&start=0
Let me know what you guys have lying around.
~JAKE
see the swap here http://cascadecrew.org/phpBB2/viewto...er=asc&start=0
#3
Haven't started tearing down the car yet, but I am going to have quite a few parts laying around. Don't know what all you'll be interested in or if they will work with your swap, but let me know if you're interested in any of it.
-Comp Cams custom style CC503 camshaft (224/230 Duration, .536/.544 lift @ 1.6rr, 114lsa)
-Comp Cams 10308-1 valve springs with titanium retainers (good to .600+ lift)
-Comp Cams RP1418-16 magnum roller rockers (1.6 ratio)
-CSR Performance 901LT1 electric water pump conversion
-Painless Wiring 50106 electric water pump wiring kit
-AC-Delco Optispark Distributor #1104032 (Replaced when motor was rebuilt)
-Racetronix Fuel pump 255lph (700rwhp capable) FLT1-FPA Fuel Pump assembly with 'Plug-and-Play' harness for easy install
-Ion Madtuner '95 Z28 mail-order tuned PCM (Should be updated to fit your specific set-up, but it's only 50.00)
-52mm BBK throttle body
-T56 Black shift **** with solid bolt-on short shifter rod (still has stock insulator base, but works great)
-K&N CAI (Filter was bought new and has only been used for 10k miles tops)
-Comp Cams custom style CC503 camshaft (224/230 Duration, .536/.544 lift @ 1.6rr, 114lsa)
-Comp Cams 10308-1 valve springs with titanium retainers (good to .600+ lift)
-Comp Cams RP1418-16 magnum roller rockers (1.6 ratio)
-CSR Performance 901LT1 electric water pump conversion
-Painless Wiring 50106 electric water pump wiring kit
-AC-Delco Optispark Distributor #1104032 (Replaced when motor was rebuilt)
-Racetronix Fuel pump 255lph (700rwhp capable) FLT1-FPA Fuel Pump assembly with 'Plug-and-Play' harness for easy install
-Ion Madtuner '95 Z28 mail-order tuned PCM (Should be updated to fit your specific set-up, but it's only 50.00)
-52mm BBK throttle body
-T56 Black shift **** with solid bolt-on short shifter rod (still has stock insulator base, but works great)
-K&N CAI (Filter was bought new and has only been used for 10k miles tops)