WTB: Suspension/Motor Parts LT1 T/A
08-03-2011, 09:39 AM
#1
WTB: Suspension/Motor Parts LT1 T/A Seeking the following parts...
+All 6 bolts that mount the K-Member to the body of the vehicle, 4 long 2 short
-The 4 receivers that the 4 long bolts screw into
+All 6 bolts that mount the motor mounts to the motor
+All bolts that mount the iron motor mount receiver castings to the K-Member
+Both long bolts that bolt the motor mounts to the iron motor mount castings (with nuts)
+All hardware to mount factory power steering rack to the K-Member
+4 bolts that mount hub to spindle
+LT Headers with Y-Pipe (perferably hooker, must accept factory o2's)
-Bolts that mount headers to heads
+4 bolts that mount both lower A-Arms to the K-Member (with nuts)
+All hardware to mount brake calipers to spindles (front only, I believe they were torx heads)
+Valve cover bolts for stock valve covers (8 total)
+Opti bolts
A lot of these parts are obscure and hard to find, and often I find that they have been discontinued. I will pay paypal or cash if its local. Parts must be in relatively good condition (ie no severe rust or rot).
If necessary I can post pictures to specifically point out what I am looking for.
Thanks always!
+All 6 bolts that mount the K-Member to the body of the vehicle, 4 long 2 short
-The 4 receivers that the 4 long bolts screw into
+All 6 bolts that mount the motor mounts to the motor
+All bolts that mount the iron motor mount receiver castings to the K-Member
+Both long bolts that bolt the motor mounts to the iron motor mount castings (with nuts)
+All hardware to mount factory power steering rack to the K-Member
+4 bolts that mount hub to spindle
+LT Headers with Y-Pipe (perferably hooker, must accept factory o2's)
-Bolts that mount headers to heads
+4 bolts that mount both lower A-Arms to the K-Member (with nuts)
+All hardware to mount brake calipers to spindles (front only, I believe they were torx heads)
+Valve cover bolts for stock valve covers (8 total)
+Opti bolts
A lot of these parts are obscure and hard to find, and often I find that they have been discontinued. I will pay paypal or cash if its local. Parts must be in relatively good condition (ie no severe rust or rot).
If necessary I can post pictures to specifically point out what I am looking for.
Thanks always!
