Bare block short block aluminum only
05-27-2014, 05:05 AM
#1
TECH Apprentice
Thread Starter
iTrader: (9)
Join Date: Mar 2010
Location: georgetown ky
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Bare block short block aluminum only Looking for a aluminum block only...
5.3-5.7-6.0
Bad block will work. Since it's going to be in a man cave for eye candy!
Not looking to spend a lot that's why a bad block will work! Hole in the side of the block i don't care!!
Live in Lexington ky so hope to stay close unless ur not asking a lot cause shipping ain't cheap anymore.
Also need a crank an 4 pistons if anyone has some they don't need any more.
If only a bare block is found.
Going to build a table if u have not got that yet lmao
Thanks Jason
5.3-5.7-6.0
Bad block will work. Since it's going to be in a man cave for eye candy!
Not looking to spend a lot that's why a bad block will work! Hole in the side of the block i don't care!!
Live in Lexington ky so hope to stay close unless ur not asking a lot cause shipping ain't cheap anymore.
Also need a crank an 4 pistons if anyone has some they don't need any more.
If only a bare block is found.
Going to build a table if u have not got that yet lmao
Thanks Jason
Trending Topics
06-05-2014, 04:12 PM
#13
Teching In
Join Date: Oct 2013
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I dont have a ls block. But i do have a 2008 BMW M6 V10 block, it has a thrown rod. Ill include the pistons and rods too.
want to get around $450 for it. The block is wide and looks pretty exotic
I also have a BMW M5 V8 block with a destroyed bore (water got into the cylinder and was compressed, it rammed the piston into the bore), want $300 with pistons
im in nashville so the drive isnt that bad.
want to get around $450 for it. The block is wide and looks pretty exotic
I also have a BMW M5 V8 block with a destroyed bore (water got into the cylinder and was compressed, it rammed the piston into the bore), want $300 with pistons
im in nashville so the drive isnt that bad.
06-08-2014, 02:35 PM
#15
10 Second Club
iTrader: (4)
Join Date: Dec 2012
Location: Winchester, VA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
I have a bare block and mains. Bores look good. Ls1 out of a 99 vette I believe. I'd have to double check numbers. I'm in Winchester va if we could work out meeting up