WTB: 43" +/- driveshaft
04-17-2015, 12:56 PM
#1
Teching In
Thread Starter
Join Date: Jun 2008
Location: Champlain, NY
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
WTB: 43" +/- driveshaft Installing a 1995 LT1 drive line into a streetrod..the stock Z28 driveshaft is 41-5/8" center to center of caps. The center of rear cap to the end of the 27 spline slip yoke is approx 47"
Could use one about 1.5" longer..just tossing this out in case someone has a longer drive shaft with the "inside lock rings".
Could use one about 1.5" longer..just tossing this out in case someone has a longer drive shaft with the "inside lock rings".
