wtb ls stuff
05-01-2015, 11:28 PM
#1
TECH Resident
Thread Starter
iTrader: (27)
Join Date: Jun 2012
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
wtb ls stuff I need the following:
3) gen 3 truck intake with dbc throttle body and injectors/fuel rails
5) trunion ls1/2/6 rockers, stands, bolts, hardened pushrods
6) ls7 lifters, trays
7) any arp studs n stuff/gaskets
9) 621 bellhousing
Pending purchase of block and heads.
gen III or gen Iv engine. prefer 5.3 or 6.0 vortec. MUST have front accessories and if DBW i would prefer to have the pedal included
express van wire harness (truck or car harness would work too)
t56, tko 5 speed or 6 speed some kind of manual transmission or even a Muncie 4 speed m20 m21 m22 Richmond Borg Warner Muncie. no t5 manuals No lt1 stuff please
cash ready
in orlando
text 812,449,0741
3) gen 3 truck intake with dbc throttle body and injectors/fuel rails
5) trunion ls1/2/6 rockers, stands, bolts, hardened pushrods
6) ls7 lifters, trays
7) any arp studs n stuff/gaskets
9) 621 bellhousing
Pending purchase of block and heads.
gen III or gen Iv engine. prefer 5.3 or 6.0 vortec. MUST have front accessories and if DBW i would prefer to have the pedal included
express van wire harness (truck or car harness would work too)
t56, tko 5 speed or 6 speed some kind of manual transmission or even a Muncie 4 speed m20 m21 m22 Richmond Borg Warner Muncie. no t5 manuals No lt1 stuff please
cash ready
in orlando
text 812,449,0741
Last edited by Jadedbird; 05-04-2015 at 02:35 AM.
05-02-2015, 12:38 AM
#2
Staging Lane
iTrader: (76)
Join Date: Aug 2010
Location: las vegas
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I will check tomorrow, I should have the valve covers, a DBC TB of a 04' 5.3L
but I do have a harness & pcm from a 05' gen III 5.3L 4L60E but it was DBW I believe, I will confirm in morning and pull it out of box
Jeff
but I do have a harness & pcm from a 05' gen III 5.3L 4L60E but it was DBW I believe, I will confirm in morning and pull it out of box
Jeff
