Wtb iron block stroker short block
12-01-2017, 10:42 AM
#2
I have a iron 6.0, 408, seasoned block, has been baked, tanked, magniflux, line hone checked. Decks checked for flatness, cut & honed .030. Everyjingvin it is new. Manley forged 4" crank(24x), Manley forged H-beam rods, Manley forged flat top pisrons, moly rings tapped for 300hp of nitrous rotating assembly fully balanced by Manley. Clevrte hp bearings, tsp custom n/a-NOS cam, comp cams stock style replacement lifters. LS2 double timing set roller timing set. No heads or covers. Never run, installed, or even had heads up bolted on since built.
$3200
$3200
12-19-2017, 06:36 PM
#4
I have a Livernoise Motorsports Iron 408/Ls3 headed N/A motor... May sell leas heads for the right price
Manley Lightweight Pro Series Crank 4"
Manley Pro Series 6.125" H-Beam Rods
Wiesco Pro Forged Small Dome(-3cc) with valve reliefs... large IN valve relief winds up being +6cc...030"over
11.8-1
Cloyes Single
Melling High Volume
EPS CamMotion 8620 Pat G Cam
BTR Pushrods
BTR Springs
LS7 Lifters
Custom Lifter Trays
LS9 Head Gaskets
All GM or Fel-Pro Gaskets
ARP Hardware Throughout
GM Main Studs/ARP Side Mains
7.5Q Fabbed Pan w/Trap Door
Custom Windage Tray
Custom Crankcase Ventilation System (Custom Valve Covers, Custom Modified ICTBillet Valley Cover, .030 Milled 823's valve lapp PTV Measured Cam Degreed, lifter Preload Set All Paperwork and every single measurement, tolerance 100% blueprinted by a former NASCAR All American Wheelin Open Wheel Asphalt Modified Engine Builder. ...
(L92's) Vic Jr Intake, MSD 6014, HeatSink Coils, GM Sensors(CPS/CPS/ECT) Bushed Trunion GM Rocker Arms...Much more TURN KEY or possibly sell in different form... Never ran
Text/Call me anytime day/night @(716)428-1674.... If you can please include your name and what your inquiring on/Looking for & I will get back to you A.S.A.P.
Thanks & happy holidays,
Adam Bainbridge.
Buffalo NY/14228.....Howell MI/48843
Manley Lightweight Pro Series Crank 4"
Manley Pro Series 6.125" H-Beam Rods
Wiesco Pro Forged Small Dome(-3cc) with valve reliefs... large IN valve relief winds up being +6cc...030"over
11.8-1
Cloyes Single
Melling High Volume
EPS CamMotion 8620 Pat G Cam
BTR Pushrods
BTR Springs
LS7 Lifters
Custom Lifter Trays
LS9 Head Gaskets
All GM or Fel-Pro Gaskets
ARP Hardware Throughout
GM Main Studs/ARP Side Mains
7.5Q Fabbed Pan w/Trap Door
Custom Windage Tray
Custom Crankcase Ventilation System (Custom Valve Covers, Custom Modified ICTBillet Valley Cover, .030 Milled 823's valve lapp PTV Measured Cam Degreed, lifter Preload Set All Paperwork and every single measurement, tolerance 100% blueprinted by a former NASCAR All American Wheelin Open Wheel Asphalt Modified Engine Builder. ...
(L92's) Vic Jr Intake, MSD 6014, HeatSink Coils, GM Sensors(CPS/CPS/ECT) Bushed Trunion GM Rocker Arms...Much more TURN KEY or possibly sell in different form... Never ran
Text/Call me anytime day/night @(716)428-1674.... If you can please include your name and what your inquiring on/Looking for & I will get back to you A.S.A.P.
Thanks & happy holidays,
Adam Bainbridge.
Buffalo NY/14228.....Howell MI/48843