WTB LS1 TPS,IAC and Holley/autometer 0-100psi sensors
03-07-2018, 06:22 PM
#3
I use the Ebay Transducers and all have tested pretty accurate. on the 0-100 psi sensors tested were only off by 1 psi above 50 psi. Tested against an air gauge and against a stock Holley sensor at the same time. https://www.ebay.com/itm/Pressure-tr...bsDfw2VbyJMPag
If you're set on Holley sensors I can see what I have left, I think I have a couple Holley 0-100 and a 5 bar sensor. I have actually had better luck with the ebay sensors than the Holley sensors. One Holley was dead on install and another quit after a week and to late to warranty them because they sat on a shelf for over a year. I've used 5-6 of the ebay sensors and they all still work.
If you're set on Holley sensors I can see what I have left, I think I have a couple Holley 0-100 and a 5 bar sensor. I have actually had better luck with the ebay sensors than the Holley sensors. One Holley was dead on install and another quit after a week and to late to warranty them because they sat on a shelf for over a year. I've used 5-6 of the ebay sensors and they all still work.