BRYCEROCKET

iTrader: (3)

Hey everyone! I recently built a strong ls1 and the block was previously sleeved in 1 cylinder. I said "screw it" and built it anyways. Well I think the sleeve is seeping coolant into the oil pan. Keep finding "milk" on my dipstick and in my oil pan, I only have about 1500 miles on this engine. Engine doesn't overheat and I performed a leak-down to verify the head gasket is ok. I'm going to keep driving it for the season and build over the winter

Anyways, my ls1 is a 98 and looking for a replacement, has to be aluminum. I'll pay for shipping through Fastenal or whatever

nhra-trans-am

iTrader: (103)

Thread moved to the correct section.