Wanted for a G-body
05-25-2005, 03:00 PM
#1
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Jul 2004
Location: Brandon, FL
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Wanted for a G-body Hey all,
I am building a g-body for the strip with an occasional trip down to the local burger stand... I figured I would try here and see if anybody had anything for sale that I could use. Below is my list. Thanks! Mike
Engine, Transmission, Rear End, Suspension
1. SBC ARP head bolts or studs
2. 750-850 holley DP
3. new braided fuel line, fttings, etc.
4. holley mechanical pump (110 or 130 gph)
5. electric fans
6. New radiator
7. New radiator hoses
8. aluminum water pump
9. aluminum pulleys
10. aftermarket balancer (350)
11. mini-starter (must be able to turn over a 12:1 motor)
12. alternator
13. LT headers
14. 3" mufflers
15. new exhauset gaskets
16. 3/8" poly locks for roller rockers
17. new poly bushings (all suspension pieces)
18. Poly motor mounts
19. Poly trans. mount
20. T-350 Trans. crossmember for long tube headers
21. new driveshaft loop (pending)
22. GOOD HEI and coil
23. 15x5 and 15x8 Pro Stars or Convo-Pros with or without tires
24. Any new brake parts for a G-body
25. Any good aftermarket control arms for the rear.
26. Transmission shield/cover for TH-350
27. autometer/autogage voltmeter, water, temp, and oil press.
I am building a g-body for the strip with an occasional trip down to the local burger stand... I figured I would try here and see if anybody had anything for sale that I could use. Below is my list. Thanks! Mike
Engine, Transmission, Rear End, Suspension
1. SBC ARP head bolts or studs
2. 750-850 holley DP
3. new braided fuel line, fttings, etc.
4. holley mechanical pump (110 or 130 gph)
5. electric fans
6. New radiator
7. New radiator hoses
8. aluminum water pump
9. aluminum pulleys
10. aftermarket balancer (350)
11. mini-starter (must be able to turn over a 12:1 motor)
12. alternator
13. LT headers
14. 3" mufflers
15. new exhauset gaskets
16. 3/8" poly locks for roller rockers
17. new poly bushings (all suspension pieces)
18. Poly motor mounts
19. Poly trans. mount
20. T-350 Trans. crossmember for long tube headers
21. new driveshaft loop (pending)
22. GOOD HEI and coil
23. 15x5 and 15x8 Pro Stars or Convo-Pros with or without tires
24. Any new brake parts for a G-body
25. Any good aftermarket control arms for the rear.
26. Transmission shield/cover for TH-350
27. autometer/autogage voltmeter, water, temp, and oil press.
