engine parts/gaskets wanted:
10-31-2005, 03:52 PM
#1
Launching!
Thread Starter
Join Date: May 2005
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
engine parts/gaskets wanted: i need someone to deal with me on a set of 6.125" ls1 eagle h beam connecting rods (or something else that will handle 900hp) 
plus a full gasket set for a 6.0 lq4 with regular old GM MLS gaskets 4.030 bore. also an oil pickup tube, a good set of used lifters with the plastic lifter 'cups' (or blocks whatever), and a stock rocker arm assembly with all necessary hardware.
also a single plane edelbrock intake with bungs and rails would be nice
a star spec 5 clutch with flywheel (better if balanced) would put me ahead.
recap:
1. 6.125" connecting rods
2. gaskets
3. oil pickup tube
4. lifters + cups
5. rocker arms + related hardware.
6. edelbrock victor JR with bungs welded and fuel rails (i haven't been able to find one)
7. star spec 5 clutch with flywheel balanced
plus a full gasket set for a 6.0 lq4 with regular old GM MLS gaskets 4.030 bore. also an oil pickup tube, a good set of used lifters with the plastic lifter 'cups' (or blocks whatever), and a stock rocker arm assembly with all necessary hardware.
also a single plane edelbrock intake with bungs and rails would be nice
a star spec 5 clutch with flywheel (better if balanced) would put me ahead.
recap:
1. 6.125" connecting rods
2. gaskets
3. oil pickup tube
4. lifters + cups
5. rocker arms + related hardware.
6. edelbrock victor JR with bungs welded and fuel rails (i haven't been able to find one)
7. star spec 5 clutch with flywheel balanced
Last edited by stevewix; 11-02-2005 at 02:28 PM.
