Ported LSx heads under $700
#1
Ported LSx heads under $700
Don't really care how ported they are. I know from time to time I see people selling some nice heads for $600 to move them, so maybe I'll get lucky and one of those people will see this :p
Just looking for a pair of heads that have been professionally ported and have good valvesprings (better than LS2/LS6). Want to be able to run a .600"ish lift cam. Don't care if valves are stock 5.7 size or larger. If 5.3 heads, they must have at least 5.7 valve sizes. Compression ratio on a stock block can be anywhere from stock to 11:1 or maybe slightly higher. I want to maintain 93-octane drivability. Centerbolt/perimeter does not matter, I have valvecovers for both.
I know to some people it sounds like I'm asking a lot, but like I said, I've seen people giving away really good heads for $600, so we'll see what happens.
Just looking for a pair of heads that have been professionally ported and have good valvesprings (better than LS2/LS6). Want to be able to run a .600"ish lift cam. Don't care if valves are stock 5.7 size or larger. If 5.3 heads, they must have at least 5.7 valve sizes. Compression ratio on a stock block can be anywhere from stock to 11:1 or maybe slightly higher. I want to maintain 93-octane drivability. Centerbolt/perimeter does not matter, I have valvecovers for both.
I know to some people it sounds like I'm asking a lot, but like I said, I've seen people giving away really good heads for $600, so we'll see what happens.
#2
TECH Enthusiast
iTrader: (7)
Join Date: Mar 2006
Location: Austin, TX
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
I know a guy with some MTI stage 2 853 heads, somewhere around 2 hours run time on them with dual springs and ferra valves. I'll check but I think he's looking to get somewhere around 7-800 for them.