Bolts needed
#1
TECH Fanatic
Thread Starter
iTrader: (52)
Join Date: May 2004
Location: Kingsland, GA
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
Bolts needed
I know this is kind of a shot in the dark, but I hate to buy these from gm, and I'm in a bit of a bind, so I thought I would try here first. Here is what I need (LS1/M6):
bellhousing to block bolts
bellhousing to gearbox bolts
flywheel bolts
pressure plate bolts
slave cylinder bolts
two rear-most oilpan bolts (ones that go into the rear cover)
bellhousing to block bolts
bellhousing to gearbox bolts
flywheel bolts
pressure plate bolts
slave cylinder bolts
two rear-most oilpan bolts (ones that go into the rear cover)
#3
TECH Enthusiast
iTrader: (37)
Originally Posted by fast377
I know this is kind of a shot in the dark, but I hate to buy these from gm, and I'm in a bit of a bind, so I thought I would try here first. Here is what I need (LS1/M6):
bellhousing to block bolts
bellhousing to gearbox bolts
flywheel bolts
pressure plate bolts
slave cylinder bolts
two rear-most oilpan bolts (ones that go into the rear cover)
bellhousing to block bolts
bellhousing to gearbox bolts
flywheel bolts
pressure plate bolts
slave cylinder bolts
two rear-most oilpan bolts (ones that go into the rear cover)
#5
TECH Enthusiast
iTrader: (37)
As best I can recall:
bellhousing to block bolts (10mm x 1.5 pitch probably 30-40mm long 1 inch =25.4mm, to convert inches to mm multiply x 25.4)
bellhousing to gearbox bolts (? can't help here, my tranny is a TKO & bellhousing is 1/2-13 SAE, but the T56 are probably also 10mm x 1.5 x 30mm)
flywheel bolts (ARP)
pressure plate bolts (ARP)
slave cylinder bolts (? as well, mine is from a mid 80's truck.)
two rear-most oil pan bolts (ones that go into the rear cover) (I think these are either 6mm or 8mm x 1.25 thread, really long, GM part # from the thread below is 12554990)
Check out the LT/LS part number list here:
https://ls1tech.com/forums/general-maintenance-repairs/336981-lt1-lt4-ls1-ls6-f-body-part-numbers.html
Originally Posted by fast377
bellhousing to block bolts (10mm x 1.5 pitch probably 30-40mm long 1 inch =25.4mm, to convert inches to mm multiply x 25.4)
bellhousing to gearbox bolts (? can't help here, my tranny is a TKO & bellhousing is 1/2-13 SAE, but the T56 are probably also 10mm x 1.5 x 30mm)
flywheel bolts (ARP)
pressure plate bolts (ARP)
slave cylinder bolts (? as well, mine is from a mid 80's truck.)
two rear-most oil pan bolts (ones that go into the rear cover) (I think these are either 6mm or 8mm x 1.25 thread, really long, GM part # from the thread below is 12554990)
Check out the LT/LS part number list here:
https://ls1tech.com/forums/general-maintenance-repairs/336981-lt1-lt4-ls1-ls6-f-body-part-numbers.html