if u guys need it
09-23-2006, 11:17 AM
#1
Teching In
Thread Starter
Join Date: May 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
if u guys need it 383lt1 parting out
--------------------------------------------------------------------------------
these parts that im selling still runs today.my car 11.40@123n/a and that was the frist time at the track with that set up.i will sell this as a create motor just make me an offer
1)-4 boilt main with eagle crank and 6"rods srp 11.8 with 58cc head maybe 3000 miles on it (all arp studs and bolts inside)bal fly wheel and ATI bal$2,500
2)cam is 236/242 with 109lsa 573/558 split custum gride from joe overton.lt1 fully ported by e.b.porting with 2.00intake valveslt1 intake fully ported to the max$1500
3)1.6 rockers comps,pushrods,comp lifters,lt4 timing chain$300 or will sell with heads for $200
4)42lbs racetronixs $200
5)fast fuel reg $50
6)58mm holley $250
7)flp long tubes with y pipe $300
8)700r4tci super streetfighter man/rev valve body(boults right in to an f-body with torge arm no modifing$1000
9)huges 3800 non-lockup for this setup or 3600lbs car $400
just ask me if u want more info on anything or more parts maybe i cant remember or if local i work at PERFORMANCE SPECIALTIES in maryland(PSI)
call 410-766-7774 ask for TOM
--------------------------------------------------------------------------------
these parts that im selling still runs today.my car 11.40@123n/a and that was the frist time at the track with that set up.i will sell this as a create motor just make me an offer
1)-4 boilt main with eagle crank and 6"rods srp 11.8 with 58cc head maybe 3000 miles on it (all arp studs and bolts inside)bal fly wheel and ATI bal$2,500
2)cam is 236/242 with 109lsa 573/558 split custum gride from joe overton.lt1 fully ported by e.b.porting with 2.00intake valveslt1 intake fully ported to the max$1500
3)1.6 rockers comps,pushrods,comp lifters,lt4 timing chain$300 or will sell with heads for $200
4)42lbs racetronixs $200
5)fast fuel reg $50
6)58mm holley $250
7)flp long tubes with y pipe $300
8)700r4tci super streetfighter man/rev valve body(boults right in to an f-body with torge arm no modifing$1000
9)huges 3800 non-lockup for this setup or 3600lbs car $400
just ask me if u want more info on anything or more parts maybe i cant remember or if local i work at PERFORMANCE SPECIALTIES in maryland(PSI)
call 410-766-7774 ask for TOM
