LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Parts Wanted (https://ls1tech.com/forums/parts-wanted-46/)
-   -   93-97 lt1 rear brakes (https://ls1tech.com/forums/parts-wanted/646509-93-97-lt1-rear-brakes.html)

xpndbl3 01-24-2007 04:43 PM

93-97 lt1 rear brakes
 
I need the backing plates, and calipers, I do not believe that the rotors are worth shipping since they're under $20 from a parts store. Anyone have them?

AlmostfastLT1 01-24-2007 04:48 PM


Originally Posted by xpndbl3
I need the backing plates, and calipers, I do not believe that the rotors are worth shipping since they're under $20 from a parts store. Anyone have them?


I have a set of rear calipers, but not backplates, pm me if interested...

Thanks Mark

xpndbl3 01-24-2007 05:01 PM

well the main problem is apparently when I order a 9" from moser that my brakes won't fit and I need to run LT1 backing plates, and calipers/rotors. So unless I can get the backing plates first, I'll have to hold off. thank you for the offer though ;)

1badchicken 01-24-2007 07:50 PM


Originally Posted by xpndbl3
well the main problem is apparently when I order a 9" from moser that my brakes won't fit and I need to run LT1 backing plates, and calipers/rotors. So unless I can get the backing plates first, I'll have to hold off. thank you for the offer though ;)

I have what you need. I have the complete setup. What is the offer though. I don't want to take the rear end apart if it's not worth it, I can take pics. I have drill slotted rotors also. send me a email if you want pics

Dragula 01-24-2007 08:16 PM

Are they different from a 97' firebird? I can get you what you need from that. I'm not to far if you wanted to pick them up or meet up to make the transaction. PM me if your interested.

DMH Fabrication 01-24-2007 08:31 PM

i have the calipers, backing plates, and all the bolts for everything. i also have the ebrake cables if needed. pm me

xpndbl3 01-24-2007 08:36 PM

i sent out pms guys. Not looking to spend an arm and a leg, just really really don't want to hit the junkyard in the winter to grab the pieces. I already have a bad immune system from medical stuff. So if you could just put up prices, that would work out a lot better, since I don't want to insult people, but cash is thin.

xpndbl3 01-25-2007 04:08 PM

bump, some guys didn't get back to me yet

Dragula 01-25-2007 05:40 PM

PM'd you back before reading this.

xpndbl3 01-26-2007 01:57 AM

how much?

Jditlfm 01-26-2007 06:55 AM

$100 plus shipping i can get you everything you want

xpndbl3 01-26-2007 07:15 PM

i'll have to mull it over for a few days, $125 is a little more than I wanted to spend.

any offers in the $45-50 range? these are 10 years old at the newest now

Jditlfm 01-27-2007 12:30 PM

ya but they dont even sell rear calipers at autozone now and you have to buy the loaded ones that are $220 and that dose not include the backing plates.. I though $100 plus shipping is reasonable. Let me know if you cant get a better deal.

Dragula 01-27-2007 03:45 PM

PM'd you back

DMH Fabrication 01-27-2007 11:44 PM

i offered 100 shipped and that was too high for him also... backing plates alone sell for 45-50 shipped all the time on here.


All times are GMT -5. The time now is 08:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands