Ahmadi6490

iTrader: (2)

I'll trade a brand new Dynomax 3" Mandrel U-Bend for a stock 2.75" s pipe and $10. I've decided 3" is a bit too big for my setup and i'd like a 2.75 so it'll smooth out the rest of my exhaust system a bit better. I've done various transactions on here and other websites so if you need feedback then message me. If you also need pics I can provide them.

-Thanks

bww3588

iTrader: (49)

how much if you sell the U bend out right? i live in Chillicothe and will be coming to Columbus tomorrow afternoon. what S- pipe are you talking about?

Ahmadi6490

iTrader: (2)

I'll sell it for $25, I got it for about $45 from Jegs. It's a 3" Dynomax Mandrel U-Bend that you cut in half, then flip and weld it, then you'll have a S Pipe. It's the pipe between the cat and the mid/intermediate pipe thats shaped like an S.

bww3588

iTrader: (49)

ohh i dont have that, i went TD's and the pipe i have is 3 inches and it goes with the SLP Loudmouth system. if you still have it at the end of next week, ill take it. im trying to get my duals tucked up a little further and a u-bend cut in the right place will help with that. but im going to check around at some exhaust shops to see what they can do with it before i go at it by myself.

Ahmadi6490

iTrader: (2)

Alright it'll probably still be here. But if you have your stock s pipe ill be more than happy to trade for that and a few bucks.

bww3588

iTrader: (49)

i dont have anything stock from my y-pipe back. and if im not mistaken, the pipe your talking about is different for the V6's. i know its a smaller diamater.

Ahmadi6490

iTrader: (2)

Yeah the V6 size is a 2.25 while the V8 is 2.75. I'm going with 3" up front then reduced down to a 2.50 and i'll need a 2.75 s pipe to help out.