WTT/ Comp Pro Mag Roller Rockers 1.75 for MT ET-Steets
#1
WTT/ Comp Pro Mag Roller Rockers 1.75 for MT ET-Steets
I would like to trade a set of Comp Pro Mag roller rocker arms ,studs ,guild plates for a set of MT ET-Streets i need 26/11.50/16's for my 16"/10" rims. The studs that's been ground on is for clearsing, because of the stud protruding into the runner, the treads are find and will screw in with out any problems.
#3
interested in the rockers how many miles ? other than clearancing the studs are there any problems?
I have a set of M/T ET streets 26/11.50/16 on chrome 16" ZR1 wheels w/ rim screws. They have lots/plenty of tread. (not much when new) I ran them with out tubes but they leak down over a few days. I would suggest putting tubes in them, if you were wanting to drive on them all the time. We might be able to do some trading. I can go out tommorow and find them in garage and snap a few pics. Do you ever go to Beech Bend?
Darin
I have a set of M/T ET streets 26/11.50/16 on chrome 16" ZR1 wheels w/ rim screws. They have lots/plenty of tread. (not much when new) I ran them with out tubes but they leak down over a few days. I would suggest putting tubes in them, if you were wanting to drive on them all the time. We might be able to do some trading. I can go out tommorow and find them in garage and snap a few pics. Do you ever go to Beech Bend?
Darin