WTB: U/D pulley, Torque Arm, Adj. Panhard
03-10-2008, 07:38 PM
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2007
Location: wentzville, MO
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
WTB: U/D pulley, Torque Arm, Adj. Panhard Like the title says...If you've got a deal on an U/D pulley, Torque arm, Or Adj. Panhard bar LEMME KNOW!!
03-12-2008, 08:28 AM
#3
10 Second Club
iTrader: (30)
Join Date: Feb 2003
Location: Cimarron KS
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
i have a tq arm it is a brm i dont have a crossmember for it it is 75.00 from bmr will sell for 200.00 shiped
Eliminate traction problems with the BMR Trak PakŠ. This design eliminates the transmission tailshaft stress by relocating the torque arm front mount. Shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. This kit consists of the adjustable torque-arm, a universal crossbrace, mounting hardware, and an anglefinder for adjusting pinion angle. Rear end mounting plates are made from strong, laser cut 3/8 " cold rolled steel. Equipped with a rear adjuster to allow on-car pinion angle adjustments up to 6 degrees for dragstrip tuning and a polyurethane front mount. Torque arm is made from 1.25" x .120" DOM tubing while crossbrace is made from 1-5/8" x .120" DOM tubing. Crossbrace requires welding and professional installation. Available in Black Hammertone or red powdercoat.
NOTE: Will not work with "diamond style" subframe connectors. Use of this product will produce additional road noise and is recommended for the serious enthusiast only. For questions please call or e-mail.
Part # TPU001 Universal Trak PakŠ
Eliminate traction problems with the BMR Trak PakŠ. This design eliminates the transmission tailshaft stress by relocating the torque arm front mount. Shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. This kit consists of the adjustable torque-arm, a universal crossbrace, mounting hardware, and an anglefinder for adjusting pinion angle. Rear end mounting plates are made from strong, laser cut 3/8 " cold rolled steel. Equipped with a rear adjuster to allow on-car pinion angle adjustments up to 6 degrees for dragstrip tuning and a polyurethane front mount. Torque arm is made from 1.25" x .120" DOM tubing while crossbrace is made from 1-5/8" x .120" DOM tubing. Crossbrace requires welding and professional installation. Available in Black Hammertone or red powdercoat.
NOTE: Will not work with "diamond style" subframe connectors. Use of this product will produce additional road noise and is recommended for the serious enthusiast only. For questions please call or e-mail.
Part # TPU001 Universal Trak PakŠ
