PLX wideband w/guage need help hooking it up.
10-16-2009, 12:03 PM
#1
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Jul 2003
Location: La Porte Tx
Posts: 4,613
Likes: 0
Received 0 Likes
on
0 Posts
PLX wideband w/guage need help hooking it up. I am installing this on my 2010 camaro..
I had a bung welded in on the driver side right before the cat.
I have the O2 installed, plugged in to the plx Module.
A good solid 12 source from the ignition, a solid ground.
there is a transmitting and receiving plug, and the analog plug..
I plan on hooking this up to my HP tuners..
right now it the gauge just reads RCH, and buries it's self to the left..
what else do i need to do?? the instruction do not elaborate..
any help here?
Thanks
Daniel
I had a bung welded in on the driver side right before the cat.
I have the O2 installed, plugged in to the plx Module.
A good solid 12 source from the ignition, a solid ground.
there is a transmitting and receiving plug, and the analog plug..
I plan on hooking this up to my HP tuners..
right now it the gauge just reads RCH, and buries it's self to the left..
what else do i need to do?? the instruction do not elaborate..
any help here?
Thanks
Daniel
