Picking up an 05 harness and pcm need help
 

I am doing a ls swap on a mustang and I have someone local selling a 4.8 with ecm and harness. I know the 05s are DBW i plan on putting an ls6 intake on it with a DBC throttle body. will the computer be able to hand this or do I need a hole different ecm and harness?

You will need to change the wiring to drive by cable (not a big issue) and make sure the PCM has IAC drivers in it. Even if the PCM doesn't have the drivers in it, you still use the harness and either run a 6243 PCM or switch the green covers for red ones and wire the harness to run a 411 PCM

How can you check to see if the computer has IAC drivers?

I found it 05 trucks do not have IAC drivers so I will need a new ecu and to repinn the wiring harness

I can help you in any way with the wiring for your swap. Feel free to email me and I can help you get exactly what you need.

Depends on the pcm hardware number, there where in fact some 2005 pcms with the iac drivers.

I checked mine does not have the drivers? Where is the best place go pick up a 4.8 DBC PCM with anti theft deleted?

I too well need to get a reprogram , but mine is DBW Gen IV . I just need a stock tune but will need help with the repin of the harness.

Just give me a call when you have a chance, I have usually 300-1000 of them in stock at any given time. I am sure I can get you what you need for cheap. Usually in the $75 dollar range. That would be with anti theft deleted.

What year is your harness, I may be able to email you wiring diagrams if you need something I have.

Its 2007 nnbs Silverado , new body style Gen IV

Give me a call, I have a few options for you.

Ive a got ecm for tune for you , get back to me when you can !

did you call?

Yes talked to you about month ago.

I get over 200-300 calls a day, you will have to call me as I don't keep records on conversations. When you are ready, call and we can get you setup.