| forklord | 09-04-2014 01:25 PM |
p0300 after clutch install
Got a mantic twin disc installed at a reputable speed shop. As soon as he started the car when he was done it would just die and barely ran at all. I managed to drive about 100 miles home in 5th gear maxed out at 50mi/hr cuz it was friday and had to get home to watch the kid. They didnt open again til tuesday....so i Unplugged one coil pack and it would still fire a bit. Unplugged the other and it wouldnt fire at all. Checked spark on each coil with insulated gloves and still got a tingle and good spark....wondering what the hell is goin on. Checked all the wiring and cant see anything. Thought maybe they pinched something. I think its too coincidental that something would just shit the bed at the same time as the clutch install. Im starting to think they cracked the block or a head/ blower putting the tranny back in. Which would be great in a sense because it would be an excuse to slap a 416 in there lol....im thinking if it was valvetrain related i wouldnt have made it home from the shop but i could be wrong. i have an attempted data log via efilive trying to start it a few times if anyone is willing to look? Injectors fuel pump and fpcm are all new and were working great before. Thanks guys! | 