O2 Sensors: Vortec vs GTO
09-09-2015, 07:54 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2013
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
O2 Sensors: Vortec vs GTO I hope this is in the right section, if not please move it.
I bought an aftermarket wiring harness for my swap (4.8 into a 240sx) last year and i have never been able to get the o2 sensors to work. The o2 sensors that came with the engine and ecu that I am using are from an 02ish silverado manufactured in Canada.
When I ordered the harness, there was no connector option available for the Vortec O2's that matched my sensors, but they had the 05-06 GTO O2 sensor connector, so that is what I went with.
My question is, do the GTO and Vortec O2 sensors send the same information to the ecu, or does one differ from the other? I have had a hard time finding wiring diagrams for either that are consistent enough to determine this.
Thanks for the help!
I bought an aftermarket wiring harness for my swap (4.8 into a 240sx) last year and i have never been able to get the o2 sensors to work. The o2 sensors that came with the engine and ecu that I am using are from an 02ish silverado manufactured in Canada.
When I ordered the harness, there was no connector option available for the Vortec O2's that matched my sensors, but they had the 05-06 GTO O2 sensor connector, so that is what I went with.
My question is, do the GTO and Vortec O2 sensors send the same information to the ecu, or does one differ from the other? I have had a hard time finding wiring diagrams for either that are consistent enough to determine this.
Thanks for the help!
