animalcrackerzrgood

Can someone advise how to hook up the brake signal for the TCC? Last wire I need to figure out then my swap is complete. Thanks.

gametech

iTrader: (1)

Simple is often better. Just tap a brake light wire.

brandon6.0

iTrader: (32)

What vehicle? It should have power when not being used and thin unlock with brakes (power removed)

I always used a 4 prong brake switch on the older swaps. Works great.

truckdoug

iTrader: (25)

^ same. late 70's chevy truck with cruise control has the double switch. one is normal open (the lights) the other is normal closed (cruise control---or in your case---TCC enable)

animalcrackerzrgood

I swapped an L83/6l80e with E92 ecm into my Solstice. It seems fine without the brake switch and just turned off the brake cel. I turned off the TCC in all but 6th gear anyway and so far I've noticed no drive-ability issues. If needed I'll figure it out later. Thanks for the advice.