Went TorqHead 24x Need Tuning Help (LT! PCM to GEN III LS!)
 

as the titles states. car is having the torqhead 24x conversion done. the lt1 pcm is just sitting in the car, is there anyone that could pull my tune from my lt1 pcm so i can have the file to have my tuner transfer to my gen III ls1 pcm. I have no turning software and nothing of the sort besides the car and having the work done. the pcm has just been sitting in the back of the car and it will be completed very early spring (just sitting at the shop).

I just need the file off the pcm, the tuner I had came down with terrible health issues and just got up and left. he closed his shop and sold everything he had.

My thought was he could look at the old tune and enter in all the same data that he agrees with and adjust anything he doesn't and see how the car does.

Thank You In Advance

there's a couple dudes on here that have gen 2 motors running stock gen 3 computers and sensors. hopefully they will chime in.

you can always ask in the gen 2 sub forum as well

Completely different pcms and tuning characteristics