P59 missing channels
 

After I upgraded from a 1 bar OS to a 2 bar OS I lost alot of channels, stuff like IFR, Cyl Airmass, etc...Here is what I see now, this is what I see connected and offline. If I change to a offline default vehicle I see just externals.. I do have a ticket in with HPT but I thought I'd ask here too.


https://cimg3.ibsrv.net/gimg/ls1tech...c3136c46d8.png

I've been having this issue a lot lately. I'll configure and save the channels, even connect to the vehicle, but as soon as I hit scan they disappear completely.

Go to Hp Tuners > VCM Scanner > Vehicles, and delete the OS files. Then try connecting the scanner again.

Russ Kemp

bookmarked that to try later

I re-polled last night and see more channels for the default vehicle but nothing more for my current vehicle. I also still don't see Injector Flow Rate or Cyl Airmass for the default vehicle so something is up...

I then went out this morning to try again and get a log and the scanner would not connect and showed the following error
https://cimg6.ibsrv.net/gimg/ls1tech...ba9a875dd3.png



I then tried to write a tune and got this error
https://cimg9.ibsrv.net/gimg/ls1tech...3d53f8cae8.jpg


Working with HPT support now. I wonder if this is related to the new SW release? Also I have not updated the drivers in the MPVI.... maybe there is a sync issue between the SCAN/EDITOR and the MPVI driver.

I'll keep posting and accepting info as I get it.

Apparently I missed a critical time tested IT problem solving technique called disconnect the battery and try again.

Problem solved, re-polled and everything shows up.

Thanks for posting this! I am getting ready to swap to a P59 on my own, and of course, I will probably have issues since its mine. LOL

I've been having this issue ALOT with 06-07 vehicles recently. Repolling works. Sometimes it takes 4-5 tries.