Edit Settings for a 160 Thermo?
Thread Starter
TECH Fanatic
Joined: Dec 2001
Posts: 1,220
Likes: 0
From: Germantown, MD
Edit Settings for a 160 Thermo? I'm trying to figure out the correct changes to make in LS1Edit for a 160 Thermostat. I posted on the e-group and someone suggested these settings:
*********************************************
- OPTIMIZED FOR 160 Hypertech PowerStat
Camaro/Firebird/Corvette
Fan 1 on/off at: 184F/175F
Fan 2 on/off at: 194F/185F
*********************************************
But then there seemed to be some debate on whether these setting are too low or not. So what is your opinion? If you have different settings that you would suggest please by all means post up.
Thanks guys,
Mike
*********************************************
- OPTIMIZED FOR 160 Hypertech PowerStat
Camaro/Firebird/Corvette
Fan 1 on/off at: 184F/175F
Fan 2 on/off at: 194F/185F
*********************************************
But then there seemed to be some debate on whether these setting are too low or not. So what is your opinion? If you have different settings that you would suggest please by all means post up.
Thanks guys,
Mike
