No code, but "TCS OFF" light won't go out
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
No code, but "TCS OFF" light won't go out What causes the "TCS OFF" light in the gauge cluster to stay on all the time?
And the orange light on the TCS switch is out.
Is there a fuse somewhere for it?
.
And the orange light on the TCS switch is out.
Is there a fuse somewhere for it?
.
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by Jeff 97 Formula
What happens when you push the switch?
.
Trending Topics
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by CW00BlackTA
In the fuse box under the hood--on the drivers side in front of the wheel well.
.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Jasonscott
Not trying to hijack, but I just got done with a cam install and my tcs off light is going on and off by itself, I wonder if we have the same issue?
if the computer is detecting misfires (like with a new untuned cam) it will cause this...I get the same effect if I try to hit the button while idling with my new cam just installed. Check for misfire codes/etc.
Originally Posted by Quickin
Thanks, I'll check. If the fuse pops will that make the light stay on in my guage cluster?
.
.
My TCS OFF light is always on and I know its not the fuse. When you pull the fuse the light won't turn on until the car starts moving. My TCS and Cruise control do not work but my ABS does... So I'm not sure what the problem is. Everything looks good but my TCS switch has been tampered with. Still doesn't explain why I have no cruise control hmmmm.
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
I'm sure this is just a little gremlin in my situation, but I thought I'd tell ya all what I did today.
I simply removed my TCS fuse, it was just fine so I put it back in. Started it up and the light was out on the guage cluster and the TCS light was illuminated normally. Drove around all day today and the TCS OFF light is out and the TCS works perfectly. I turned it on and off a bunch of times and its back to normal.
Who knows.
.
I simply removed my TCS fuse, it was just fine so I put it back in. Started it up and the light was out on the guage cluster and the TCS light was illuminated normally. Drove around all day today and the TCS OFF light is out and the TCS works perfectly. I turned it on and off a bunch of times and its back to normal.
Who knows.
.
Originally Posted by Quickin
I'm sure this is just a little gremlin in my situation, but I thought I'd tell ya all what I did today.
I simply removed my TCS fuse, it was just fine so I put it back in. Started it up and the light was out on the guage cluster and the TCS light was illuminated normally. Drove around all day today and the TCS OFF light is out and the TCS works perfectly. I turned it on and off a bunch of times and its back to normal.
Who knows.
.
I simply removed my TCS fuse, it was just fine so I put it back in. Started it up and the light was out on the guage cluster and the TCS light was illuminated normally. Drove around all day today and the TCS OFF light is out and the TCS works perfectly. I turned it on and off a bunch of times and its back to normal.
Who knows.
.
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by senicalj4579
i'm having the traction control problem and code P0121 after my ls6 intake install. the engine surges off and on. traction control off light will not go off
.