daytona prototype tuning??
#22
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
well i know im gonna run a professional products intake ported matched to a set of 035 stage 3 heads they have the bigger valves but dont recall size
and a 90mm ported and polished throttle body
so i should be close to hp of what these cars made right??
and a 90mm ported and polished throttle body
so i should be close to hp of what these cars made right??
#24
That sounds like a really cool project. I'd like to do one of those short stroke LS7's like katech sells (346cid) with a cam in the 270ish duration. I definately think its tuneable
#25
TECH Fanatic
iTrader: (52)
Join Date: May 2004
Location: Kingsland, GA
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
That cam sounds nasty....but so do a lot of others. It all depends on what you can tolerate. If you don't plan on road racing, then there are a lot of nasty sounding cams with better street manners. Like I said that cam will probably need to idle over 1200 rpm. That's not ideal for a street car.
As far as tuning goes...if you know what you are doing, you can tune just about anything. Me...I'm still learning.
To answer your initial question: yes the cam is tuneable.
As far as tuning goes...if you know what you are doing, you can tune just about anything. Me...I'm still learning.
To answer your initial question: yes the cam is tuneable.
#35
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
because i just stumbled upon the internals for a good price
and i think it would be cool
maybe even economicle lmfao
then i can spray **** tons of nitrous to it and make up for the missing cubes
and i think it would be cool
maybe even economicle lmfao
then i can spray **** tons of nitrous to it and make up for the missing cubes