PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

I'm getting knock only when I go into PE mode.

Thread Tools
 
Search this Thread
 
Old Mar 3, 2008 | 06:56 PM
  #1  
The Alchemist's Avatar
Thread Starter
UNDER PRESSURE MOD
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (19)
 
Joined: Nov 2001
Posts: 10,813
Likes: 15
From: Doylestown PA
Default I'm getting knock only when I go into PE mode.

I've noticed that I get slight knock retard as I roll into the throttle and go I'm guessing that it's right when I hit PE mode. It's not a lot of knock, it's like 1.5-2.5 degrees and decreases quickly as I go up the rpm range. I'm posting my tune when this log was taken, and I've already adjusted the VE table as it was lean in the range. I've also captured a screen shot of the actual spot I'm talking about. Any help or advice is appreciated.
Thanks.

I put up the tune that was in the car when I logged this, as well as what is currently in the car as well as the cfg file.

Again, the only time I see knock is in the 3500-4500 rpm range when I am rolling into the throttle.
Attached Thumbnails I'm getting knock only when I go into PE mode.-2nd-gear-wot.jpg  
Attached Files
File Type: hpt
02-09-08 tuning sdol.hpt (455.2 KB, 58 views)
File Type: hpl
02-09-08 wideband.hpl (138.9 KB, 182 views)
Reply




All times are GMT -5. The time now is 09:04 AM.