Redhardsupra's ve spreadsheet
Thread Starter
TECH Fanatic
iTrader: (52)
Joined: May 2004
Posts: 1,354
Likes: 0
From: Kingsland, GA
Redhardsupra's ve spreadsheet After I copy my logs into the spreadsheet, do I copy those results into the primary and secondary ve tables? Or do I just change the values in my ve tables by the number specified in the spreadsheet results?
And on the RAF spreadsheet where do I get the data from? Do I have to make a custom histogram for ect, ltit, stit?
Also, why would hptuners show wb afr when the wideband isn't connected?
And on the RAF spreadsheet where do I get the data from? Do I have to make a custom histogram for ect, ltit, stit?
Also, why would hptuners show wb afr when the wideband isn't connected?
Last edited by fast377; Apr 17, 2008 at 03:37 PM.
I haven't used HPTuners is close to a year but hopefully these answers will help.
Copy and paste those values in but when you paste use the paste special and multiply by % option.
The WB AFR is just an option that can be used if you have one.
Copy and paste those values in but when you paste use the paste special and multiply by % option.
The WB AFR is just an option that can be used if you have one.
Thread Starter
TECH Fanatic
iTrader: (52)
Joined: May 2004
Posts: 1,354
Likes: 0
From: Kingsland, GA
Cool, thanks. Are you sure it's copy special %? Seems like + would make more sense.
And I do have a wb...it just wasn't connected to the eio last time I logged and it still showed like 11.x afr.
And I do have a wb...it just wasn't connected to the eio last time I logged and it still showed like 11.x afr.
