what did you do to your firebird today?
The following users liked this post:
ARSENAL670 (06-11-2021)
#3763
Thank you. No, we do not. Once I came across this, it was a "must have."
#3764
When locking up for the night last night I got the dreaded headlamp up/down and roar. So I had the drivers side headlamp assembly out today and performed the 180 rotate on the motor gear! First time doing this was was much easier than I expected! Meanwhile I ordered a brass one to have on standby for the next time this happens
The following users liked this post:
JohnR (07-15-2021)
#3766
#3767
Copy & Paste Moderator
Custom LED Side Markers:
https://ls1tech.com/forums/appearanc...e-markers.html
And of course someone starts making/selling LED side markers a month after I make own own. If they were available earlier, I would have bought them instead, However, the ones I made are 2 stripes vs their 1 stripe, so mine are unique and no one else has a set exactly like them.
https://ls1tech.com/forums/appearanc...e-markers.html
And of course someone starts making/selling LED side markers a month after I make own own. If they were available earlier, I would have bought them instead, However, the ones I made are 2 stripes vs their 1 stripe, so mine are unique and no one else has a set exactly like them.
The following users liked this post:
ARSENAL670 (07-17-2021)
#3768
Low oil pressure at idle LQ9 SWAPPED TA
I don't know if this is the thread for this but it will take 2 cranks to startup and die in reverse so I assume that's a tuning issue at startup gets 40 psi of oil pressure great then once it starts getting into the drive it will get to 20 at idle is this normal ? Is my gauge not reading correctly I just need some advice Thanks
The following 4 users liked this post by blackbyrd:
#3770
#3771
10 Second Club
#3772
TECH Veteran
iTrader: (14)
@Barn Find CETA thanks!!! I still might raise it a bit depends on how she behaves . Adjustable upper and lower a arms and k member from UMI . I took it to an alignment guy that raced circle track cars.
@WS6 #3392 hey thanks man! After I get her tuned Monday hoping to get a but more active with shows and such
@WS6 #3392 hey thanks man! After I get her tuned Monday hoping to get a but more active with shows and such
#3773
10 Second Club
@Barn Find CETA thanks!!! I still might raise it a bit depends on how she behaves . Adjustable upper and lower a arms and k member from UMI . I took it to an alignment guy that raced circle track cars.
@WS6 #3392 hey thanks man! After I get her tuned Monday hoping to get a but more active with shows and such
@WS6 #3392 hey thanks man! After I get her tuned Monday hoping to get a but more active with shows and such
#3774
#3776
#3777
TECH Veteran
iTrader: (14)
Probably not I have rough schedule with work these days.
I'm right into he middle of Nashville and Knoxville TN takes about an 1hr and 20 ish minutes to get to either one. You talking about rod run in pidgeon forge? I've never actually gone to that one. Heard a ton of fun stories though
I'm right into he middle of Nashville and Knoxville TN takes about an 1hr and 20 ish minutes to get to either one. You talking about rod run in pidgeon forge? I've never actually gone to that one. Heard a ton of fun stories though
The following 3 users liked this post by blackbyrd:
#3779
10 Second Club
The following 2 users liked this post by blackbyrd:
ramairjohn2000 (07-20-2021), Y2kHawk05 (07-31-2021)