what did you do to your firebird today?
#461
Found out last night after hooking up EFIlive to my ta that i was only getting 80% throttle, today took all of 2 mins to adjust throttle to get 100% And planned to take it out tonight to see what a difference it made. And to try and mess with tunnign some so i can learn. But damn rain tonight!
#464
TECH Junkie
iTrader: (2)
Join Date: May 2006
Location: somewhere that doesn't get snow
Posts: 3,452
Likes: 0
Received 3 Likes
on
3 Posts
I installed a strut tower brace i got used from a friend of mine for $25. we repainted it black (it was red as seen in one spot in the pic, i already touched up the paint after i saw it)
#467
TECH Fanatic
iTrader: (4)
Drove it to work as I dreamed about my new tires arriving this week so I can finally mount those goddamn speedlines I bought last year.
EDIT:
Finally got the speedlines mounted. I want to get excited but, they're just stock wheels after all.
Yeah those bitches'll be flocking because of my new 17s lol....
EDIT:
Finally got the speedlines mounted. I want to get excited but, they're just stock wheels after all.
Yeah those bitches'll be flocking because of my new 17s lol....
Last edited by myk; 05-11-2011 at 05:49 PM.
#470
used parts
everything on the car is stock right now...even the wheels...im new to this...do u no any particular forums where people sell things? a friend of mine bought a k&n cold air intake off of here for 85 bucks...and they cost 400 new
#471
11 Second Club
I was *hoping* to hear mine run again (first time in three months!) but the vendor I got my AC kit from screwed up my order. In the last week, I've re-installed the freshly re-coated LT Grot headers, new plugs, plug wires, O2 sensors, alternator, starter, whole new AC system, belts, brakes, fluid flush... if my damn AC seals had arrived, I'd be driving it right now, but the AC kit didn't have the seals in it.
Hopefully this weekend.
Hopefully this weekend.
#472
Put a Melling high volume oil pump in it, and while I was at it installed solid motor mounts too.
The mounts were almost easy compared to the oil pump R&R - that was as bad as a colonoscopy! But, at operating temp and idle, I now have 30 PSI, and 75 PSI at WOT.
The mounts were almost easy compared to the oil pump R&R - that was as bad as a colonoscopy! But, at operating temp and idle, I now have 30 PSI, and 75 PSI at WOT.
#477
TECH Fanatic
iTrader: (13)
Join Date: Jan 2009
Location: Fenton, MI
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Bought it a new stereo system, and later im gonna finish running lines to my oil filter, and wire in my 5-pin MAF and MAP extension.
Also, started working on a license plate mount for my GO PRO Camera.
I machined up a mount, and ordered a tripod mount to use with it.
Also, started working on a license plate mount for my GO PRO Camera.
I machined up a mount, and ordered a tripod mount to use with it.
Last edited by PUNISHER TA; 05-16-2011 at 01:17 PM.
#479
TECH Regular
iTrader: (5)
Join Date: Jan 2010
Location: SOUTHERN CALIFORNIA... O.C.
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
inspected the turbo compressor blades, cleaned my air filter, inspected the throttle body, inspected the turbo piping, inspected the methanol pump, hoses, and nozzle... everything looked good
#480
11 Second Club
IT'S ALIVE!!!
After having an AIR fitting fall off my old headers, the AC system died, the alternator died... it's all back together. I started it up for the first time in a month today. Runs like a champ. As soon as I charge the new AC system, she's back on the road. Tomorrow... can't wait! Been too long since it last left the garage.
-R
After having an AIR fitting fall off my old headers, the AC system died, the alternator died... it's all back together. I started it up for the first time in a month today. Runs like a champ. As soon as I charge the new AC system, she's back on the road. Tomorrow... can't wait! Been too long since it last left the garage.
-R