Firebird Headlights--ALL COMMENTS/QUESTIONS REGARDING HEADLIGHTS GO IN HERE
#862
TECH Fanatic
iTrader: (4)
i checked the in-car fuse box and both under-hood fuse boxes and they all looked good.
I did not check to see if the motors were getting power or not, i am unsure how to go about doing that. If there is a good page to read or something that would help that would be nice.
Also every single light on the car works as far as all the lamps and turn signals and everything. The only issue is the lights dont lift up, the motors dont even make a slightest bit of a sound or anything as far as i can tell.
Thanks in advance
I did not check to see if the motors were getting power or not, i am unsure how to go about doing that. If there is a good page to read or something that would help that would be nice.
Also every single light on the car works as far as all the lamps and turn signals and everything. The only issue is the lights dont lift up, the motors dont even make a slightest bit of a sound or anything as far as i can tell.
Thanks in advance
#863
TECH Regular
iTrader: (8)
Join Date: Dec 2009
Location: Fayetteville, NC
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
grrrr...my driver headlight is lifted alittle again, I can pull it up about 50% more...grr...loose bolt or case has come un-done again, this will be the 4th time...this time, I'm just buying a new motor from advanced auto...seems JB weld didn't even hold it last go-around....
#864
TECH Apprentice
iTrader: (5)
Join Date: Apr 2007
Location: alabama
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
I just got a great deal on a 98 T/A.
The driver side headlight does not come up. It does not grind or anything. The lights come on but the motor does nothing.
What are some things I need to check before going and buying a new motor. Is there a fuse somewhere or relay for just the driver side?
The driver side headlight does not come up. It does not grind or anything. The lights come on but the motor does nothing.
What are some things I need to check before going and buying a new motor. Is there a fuse somewhere or relay for just the driver side?
#865
TECH Regular
iTrader: (8)
Join Date: Dec 2009
Location: Fayetteville, NC
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
I just got a great deal on a 98 T/A.
The driver side headlight does not come up. It does not grind or anything. The lights come on but the motor does nothing.
What are some things I need to check before going and buying a new motor. Is there a fuse somewhere or relay for just the driver side?
The driver side headlight does not come up. It does not grind or anything. The lights come on but the motor does nothing.
What are some things I need to check before going and buying a new motor. Is there a fuse somewhere or relay for just the driver side?
#866
im having almost the same problem as Kev SS is but mine does grind and it doesnt want to pop up anything i can do to help it pop up ? it does grind when i cut them on and off and it is a metal gear in it
#867
One Up One Down!!!!!
My gear on the drivers side light was stripped. I took it apart replaced it with a new one mounted it, but before putting everything back on I decided to check it out and make sure that it works properly. Well, good thing I checked, because there is a problem. With both the lights turned off and both in the off (down) position, I turn the headlights on the the drivers side stays down with the light on while the passenger side opens and light is on. When I turn them off the passenger does as it should, but the drivers side flips up (on position) but the light itself is off like it is suppose to be. I read through has much of this forum as I could and I read where you should turn the lights on and off numerous times to get them to sync, but I have tried this and it has not worked. I'll take any help anyone can give me!!!!! The gears and lights work (perfectly) as far as motion and everything of the sort. They just won't work together!!!!!!!! Thanks for any help you might be willing to give!!!!
#868
TECH Senior Member
iTrader: (2)
My gear on the drivers side light was stripped. I took it apart replaced it with a new one mounted it, but before putting everything back on I decided to check it out and make sure that it works properly. Well, good thing I checked, because there is a problem. With both the lights turned off and both in the off (down) position, I turn the headlights on the the drivers side stays down with the light on while the passenger side opens and light is on. When I turn them off the passenger does as it should, but the drivers side flips up (on position) but the light itself is off like it is suppose to be. I read through has much of this forum as I could and I read where you should turn the lights on and off numerous times to get them to sync, but I have tried this and it has not worked. I'll take any help anyone can give me!!!!! The gears and lights work (perfectly) as far as motion and everything of the sort. They just won't work together!!!!!!!! Thanks for any help you might be willing to give!!!!
#869
so today my passenger headlight wouldn't go up. it didn't make the jackhammer noise, therefor it couldn't bee the gear (i think), it just wouldn't go up. i was able to see the light turn on so what i did i manually raised the light and when it was up i tried to see if it would go down by switching the switch to OFF and sure enough it worked as it should. now that i kinda fixed it for today or however long it decides to be friendly, should i manually lower the light now that its working properly or should i leave it as is? oh, and what should i expect from this? what could have been the problem or what? Thanks guys!
#870
ok. heres the deal. my headlights dont always come up. i checked the spade connectors and there was some corrosion on it. i cleaned it off thinking it was the main problem but i guess it wasnt. my headlights come up sometimes, and wen it doesnt all i have to do it turn the manual **** just a little and turn the headlight switch (inside of car) and it does come up. i dont understand wat is the problem. any ideas?
#871
TECH Regular
iTrader: (8)
Join Date: Dec 2009
Location: Fayetteville, NC
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
ok. heres the deal. my headlights dont always come up. i checked the spade connectors and there was some corrosion on it. i cleaned it off thinking it was the main problem but i guess it wasnt. my headlights come up sometimes, and wen it doesnt all i have to do it turn the manual **** just a little and turn the headlight switch (inside of car) and it does come up. i dont understand wat is the problem. any ideas?
#872
Headlights Are opposite Pos!!!!!
I've tried to manually run it back down when I turn the switch off but it just sits there when I turn the switch on. Everything worked fine b4 my gear stripped out Please HELP