2000 WS6 BTR4 First Start & Build List
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2016
Location: Buffalo, NY
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
2000 WS6 BTR4 First Start & Build List
Thought I'd share the first fire of my cam only ls1, and some info on the build. It didn't keep up very long after getting into closed loop without a tune. Even though my house stunk like gas from the bigger injectors/open headers, it was well worth it lol
45k mile SBE/Stock 853s
Fast 102/Holley 90
BTR4 235/242
BTR .660" Platinum Duals
Stock rockers w/ Smith Bronze trunnion upgrade & chromoly pushrods
TSP 1 7/8" LT Headers
LS2 rails & injectors
JP Performance billet single roller
Melling 10295
LS6 valley cover
Next is a Nitrous Outlet plate, 150 wet shot on a single stage ran by an NX Maximizer 4 progressive controller.
Goal for the car this year is 6.4-6.6 1/8 mile. 6 speed full interior (besides back seats). Strange 12 bolt on it's way, as well as Spohn Pro Series Torque Arm, LCAs, & PH Rod for now. Left for this year is a McLeod RXT, wheels & tires, shocks & springs, and a cage.
Thanks for looking!
45k mile SBE/Stock 853s
Fast 102/Holley 90
BTR4 235/242
BTR .660" Platinum Duals
Stock rockers w/ Smith Bronze trunnion upgrade & chromoly pushrods
TSP 1 7/8" LT Headers
LS2 rails & injectors
JP Performance billet single roller
Melling 10295
LS6 valley cover
Next is a Nitrous Outlet plate, 150 wet shot on a single stage ran by an NX Maximizer 4 progressive controller.
Goal for the car this year is 6.4-6.6 1/8 mile. 6 speed full interior (besides back seats). Strange 12 bolt on it's way, as well as Spohn Pro Series Torque Arm, LCAs, & PH Rod for now. Left for this year is a McLeod RXT, wheels & tires, shocks & springs, and a cage.
Thanks for looking!
#4
10 Second Club
Sounds nice dude! Will you get it on the dyno?
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2016
Location: Buffalo, NY
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man! Yea my parts guy has a mustang dyno, I will be having him tune the car without, then with the nitrous after I get the rear end and clutch installed. Looking forward to seeing what it will put down on a load bearing dyno. Hoping 420whp off the spray..but it could be lower. Video will be posted here when the time comes. Hopefully in a month or so
#6
10 Second Club
Any updates?