Originally Posted by Gravedigger1
OK so I just got front/rear brembos from a 2010-2015 Camaro. so looking to see what I need for front/rear rotors. I read I need to drill out caliper mounts to 14 mm. front and rear? thanks for the help. Brian.
Drill out the fronts only. you will also need new caliper bolts. You can buy some at Ace or other hardware/fastener stores - 14mm x 2.0 x 40mm
As for the rotors you can either buy 10-15 Camaro fronts and 2015 Chevy SS rears or just buy front and rear rotors for a 2015 Chevy SS. I just bought a complete 15 SS set of Centric rotors off Rock Auto for my Brembo swap.
You will have to trim the dust shield on the rears as well regardless of what rotors you use.