Gto Roll Cage
[/QUOTE] 
12-15-2009, 10:37 PM
#43
11 Second Club
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
those welds go all the way around...
with your crooked eyes i am surprised you are a die maker(and working the tool shed at a production shop sharpening bits for the real machinists doesn't count for much,junior)
of course your just polishing their tools with your mouth anyhow,tool maker homo...
your car has only shown what wasting time and money does,plus you were called out before and crawfished out with excuses...
you quote specs and safety but were willing to spray enough nitrous to crack the block on that abomination that was a nice gto back when you were first called out to a track by people who are already faster than you will ever be...
potentially causing at least a major oil down and at best a fuel fire(more likely)none of which you or your experience would be able to control...
willing to talk nonsense cloaked in practical knowledge,leads me to understand you as a fellow who is not long for this world...
with your crooked eyes i am surprised you are a die maker(and working the tool shed at a production shop sharpening bits for the real machinists doesn't count for much,junior)
of course your just polishing their tools with your mouth anyhow,tool maker homo...
your car has only shown what wasting time and money does,plus you were called out before and crawfished out with excuses...
you quote specs and safety but were willing to spray enough nitrous to crack the block on that abomination that was a nice gto back when you were first called out to a track by people who are already faster than you will ever be...
potentially causing at least a major oil down and at best a fuel fire(more likely)none of which you or your experience would be able to control...
willing to talk nonsense cloaked in practical knowledge,leads me to understand you as a fellow who is not long for this world...
also i did all my own fab work. back half,cage all of it. and it is nhra legal unlike youre junk
12-15-2009, 10:44 PM
#45
11 Second Club
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
as far as the die maker comments. look at my car compared to youre's. do you really want to talk wage and ability. i mean really. if you do go ahead but look at what i have done before you say too much.
i am the head die maker at a shop in michigan. say what you want but look at my car before you speak. no cut corners no cut cost. this is not a budget build muffler pipe car like youres . a real car set up the right way
i am the head die maker at a shop in michigan. say what you want but look at my car before you speak. no cut corners no cut cost. this is not a budget build muffler pipe car like youres . a real car set up the right way
12-15-2009, 10:46 PM
#46
11 Second Club
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
post some more pics all we have seen so far is some of youre half welded cage. you call me out. i have posted pic after pic. lets see youre car
lets seee it. i have 35 spline strange axles what are youres stock gm
lets see some pics.
lets seee it. i have 35 spline strange axles what are youres stock gm
lets see some pics.
12-15-2009, 10:55 PM
#47
11 Second Club
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
also it was 17 hrs to drive to the east coast shoot out. at first i thought it was about a 8hr drive but 17 is a whole new story. and for someone with a muffler pipe cage you should realize the diff
pulling a trailor for 17 hrs through the mountains to race a bunch of guys i dont know was not worth it sorry. kind of like it was not worth it for you to build youre car right but talk **** about me.
pulling a trailor for 17 hrs through the mountains to race a bunch of guys i dont know was not worth it sorry. kind of like it was not worth it for you to build youre car right but talk **** about me.
12-15-2009, 11:01 PM
#48
11 Second Club
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
look at the pics . that rear end came from a trailor from my parents farm. not like the trailor you live in but like a hay trailor. i cut it out from a truck box narrowed it and did all of this and you have a half welded cage and call me out.
LOL give me a break
LOL give me a break
12-15-2009, 11:33 PM
#50
11 Second Club
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
epic fail not welded. sorry but the proof is in the pic.plus it is def not chromoly.not even D.O.M pipe just some welded pipe to look like a cage. i really doubt it is .125 wall just by the look of the weld.it is rolled electric welded cheap *** tube. trust me i know. how blue it is at the weld seam gives it away . it is thin wall pipe
Last edited by quick346; 12-15-2009 at 11:39 PM.
12-16-2009, 08:41 AM
#53
Launching!
Join Date: Oct 2006
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
