GTOdave

ok guys..all you guys have been a big big help..and im down to the last thing..i gotta measure theses push rods..but i was wondering if you guys would mayeb just know what ones i need sense Texas Speed doesnt know...
http://www.texas-speed.com/shop/item...d=832&catid=47
this is the head cam package i got..i didnt change the rockers nor the lifters or any thing else else but the cam and heads...so i was wondering if any of you guys couls possible know what lenth i would maybe need...maybe a .025 in more or even smaller?? idk guy....

thanks again GTOdave

GTOdave

i got the Torquer V2 cam shaft with that swap guys

GTOdave

114 lsa

hivoltagedriver

iTrader: (1)

7.4" is standard, and it what I have seen used in most cam swaps with the 243 heads. The only way to know for certain is to measure though.

GTOdave

ive never measured push rods before..whats the easiest way