When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm in the process of installing a LS1 from a '04 GTO into my '69 chevelle. I've attached gifs
of the C206 connector with all of its pinouts labeled. Does anyone out there know which wires on this connector I need to get the engine started and running?
not really. for example, pin 3 is VSS (vehicle speed sensor), but which system uses it. If it's associated with the cruise control, I don't need it. The same goes for many of the other pins: emission control, etc. I just don't know which is needed.
not really. for example, pin 3 is VSS (vehicle speed sensor), but which system uses it. If it's associated with the cruise control, I don't need it. The same goes for many of the other pins: emission control, etc. I just don't know which is needed.
Ask a mod to move this to the Conversions & Hybrids section. That's where you want to be.
11-18-2014, 02:01 PM
c206 connector 
