GTO Kick Panel
 

How do you fix this. There's no screws to take off the kick panel to try to slide it in?
https://cimg0.ibsrv.net/gimg/ls1tech...e34913b915.jpg

I can't tell if its the right one but maybe this will help.
Trim Replacement - Hinge Pillar




http://127.0.0.1:9001/servlets/TifToGif?pic=1355761

1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
2. Remove the front seat adjuster outer cover. Refer to Seat Cushion Outer Trim Panel Replacement .
3. Remove the door sill plate. Refer to Door Sill Plate Replacement .
4. Remove 2 hinge pillar trim panel retaining screws (1).
5. Disengage the hinge pillar trim panel retaining clip (2), by pulling the lower edge of the trim panel assembly rearward.
6. Remove the trim panel from the vehicle.

Fixed it, the clip was broken, used a washer to hold it in now.
https://cimg2.ibsrv.net/gimg/ls1tech...865af9aee4.jpg
https://cimg1.ibsrv.net/gimg/ls1tech...7f8ea1b96b.jpg

Did that drawing help?

Yes it did, thank you