853 heads
07-24-2017, 07:49 AM
#2
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Well I know a guy who runs a t-rex cam on stock 241 heads and is fine. Since that can is bigger than yours and the 241 and 853 heads are basically the same you should be ok. But as always you should check clearances to be sure
07-24-2017, 07:50 AM
#3
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Well I know a guy who runs a t-rex cam on stock 241 heads and is fine. Since that cam is bigger than yours and the 241 and 853 heads are basically the same you should be ok. But as always you should check clearances to be sure
07-24-2017, 10:55 AM
#5
Teching In
Thread Starter
Join Date: Jul 2017
Location: Cali
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HCI2000SS
Double post
I'm planing to rebuilt my 4l60e to handle up to at least 500hp for now so far I have a YankSS 3600 converter . Any good best performance rebuilt kit you recommend or is it all the same ?
Thank you .
Trending Topics
07-24-2017, 01:32 PM
#8
Teching In
Thread Starter
Join Date: Jul 2017
Location: Cali
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tech@WS6store
Get a better external trans cooler also.
Did you take your heads off and have them machined?
Did you take your heads off and have them machined?
07-24-2017, 03:28 PM
#10
Teching In
Thread Starter
Join Date: Jul 2017
Location: Cali
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tech@WS6store
I meant if you had your heads flat milled or any surface removed youll want to double check ptv before final install.
07-24-2017, 11:16 PM
#12
Teching In
Thread Starter
Join Date: Jul 2017
Location: Cali
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tech@WS6store
If your 853s have a notch on deck we have the mls gaskets for that...or if no notch we have those also
What's your opinion on the
Description:
82-02 Spohn Perf. Top-Gun Driveshaft Powerglide Long Tail
Part#LMC175-TG